Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Biodiesel Running Engine
This product is a running bio-diesel engine for use in an educational context. The engine is mounted in a frame with wheels and allows you to:
• Easily demonstrate the use of bio-fuels in a working machine.
• Operate continuously in ambient temperatures up to 52 C (122 F).
• Conveniently use and display this engine because of its compact and inclusive design.
A 67-page Technical Manual is supplied with the engine.
DESIGN FEATURES AND EQUIPMENT
• Continuous operation in ambient temperatures up to 52 C (122F)
• Self-vent fuel system with individual fuel-injection pumps
• Fuel filter/agglomerator
• Fuel-lift pump
• Combustion-chamber glow plugs
• Heater plugs
• Gear-driven positive displacement-type lubricating-oil pump
• Spin-on lubricating-oil filter
• Low oil-pressure switch
• Exhaust valve seat inserts
• Inlet and exhaust manifolds
• Heavy-duty air cleaner
• Radiator with choice of pusher or puller fan
• Flywheel with ring gear
• Flywheel housing with SAE5 flange
• 250-hour service intervals
• Operators handbook
• Mounted on trestle with rubber pad and with castor wheels
• Instrument panel:
- Ignition key
- Engine warning lights
- Coolant level
- Battery charge
- Low engine oil pressure
- High engine oil pressure
• Exhaust pipe
• New starter battery – 12V
• Fuel tank
• Custom tool kit for adjustments and repair
• Option for 2 tanks (one for bio-diesel, one for diesel)
• Each tank with different color codes
ENGINE CHARACTERISTICS
• New agricultural engine
• Fueled by pure bio-diesel (B100)
• 4 cylinders in line, 1860cc
• Fixed speed motor, 1550/1800 rpm
• Indirect injection
• Water-cooled
• Naturally aspirated
• CE Certified Quality & Safety Standard
TECHNICAL FEATURES
• Power (kW) 6.9 ~ 18.7
• Power (BHP) 9.25 ~ 25.08
AGRICULTURE APPLICATIONS
1. Generation Set: provides source for light, welding
2. Pump Set: pumping oil running at fixed speed
3. Hydraulic Pump: moving water and extracting water from wells
4. Compressor Unit: for air pressure....
Equipment for Education, Engineering and Vocational Training - Moisture Meter Trainer Moisture Meter Trainer....
Product Code: ETKN-0455 - (Moisture Meter Trainer for Vocational Training and Didactic Labs)Gas Running Engine IAW-Marelli Multi-Point Electronic Injection
This product is a running IAW-Marelli gas engine with Multi-point electronic injection. It is mounted on a strong painted steel stand with anti-vibration rubber caps. Each support is equipped with four nylon wheels with brakes.
SPECIFICATIONS:
• 4 Cylinder FIAT Engine
• 2 Valves per Cylinder
• Overheard Camshaft (OHC)
• Electronic Ignition
• Displacement: 1300 cu. Cm
• Gearbox: 5 Forward Speeds + Reverse
• Diagnostic Connector
• OBD2 socket connection
• Completely Reconditioned and in Working Condition
• Mounted on a stand with wheels
COMPLETE WITH:
• Fuel Tank
• Fuel Filter
• Battery with Relevant Electric System
• Silencer
• Accelerator Command
• Starting Key
• RPM Counter
• Water Temperature Device
• Voltmeter
• Oil Pressure Indicator
• Alternator Charge Indicator
• Radiator with Fan/Electro-fan
• Coolant Tank
• Mesh Guards
• Diagnostic Connector (Where Provided)
• Instruction Manual
SHOWING:
• No-load Operation
• Simulated Failures
• Repair Demonstrations
• Assembly-disassembly....
Equipment for Education, Engineering and Vocational Training - Moment of Inertia Trainer Moment of Inertia Trainer....
Product Code: ETKN-0456 - (Moment of Inertia Trainer for Vocational Training and Didactic Labs)Diesel Running Engine FIAT Common Rail JTD Unijet
This product is a running FIAT diesel engine with common rail JTD Unijet. The engine is mounted on a sturdy stand with wheels.
SPECIFICATIONS:
• 4 Cylinder FIAT Engine
• 2 Valves Per Cylinder
• Overheard Camshaft (OHC)
• Turbo-compressor
• Displacement: 1900 cu. Cm
• Gearbox: 5 Forward Speeds + Reverse
• Diagnostics Socket
• OBD2 Socket Connection
• On Request: Multi-jet, 1300 cc, DOHC, 4 Valves Per Cylinder
• Completely Reconditioned and in Working Condition....
Equipment for Education, Engineering and Vocational Training - Moment of Inertia of a Flywheel Trainer Moment of Inertia of a Flywheel Trainer....
Product Code: ETKN-0457 - (Moment of Inertia of a Flywheel Trainer for Vocational Training and Didactic Labs)Wiring System Trainer, Electronic Ignition
This product is an automotive wiring system trainer with an electronic ignition unit used to study the entire electrical system of a vehicle. It is operated by 120V, mounted on a stand, and easily allows you to:
• Educate your students on how to assemble specific aspects of a vehicles electrical system.
• Troubleshoot instructor produced faults or bad connections in the wiring system.
• Assemble or disassemble its various parts to study the entire system.
SPECIFICATIONS:
• Front and rear lights
• Turn indicators
• Emergency
• Licence plate light
• Horn
• Windshield wiper motor
• Instrument panel
• Battery
• Battery ignition
• Spark plugs
• Coil
• Fuse box
• Starter motor
• Alternator
• Voltage regulator
• Wires with red couplings (positive) 19 gauge
• Wires with black couplings (negative) 10 gauge
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - Monochromatic Light Wavelenght Trainer Monochromatic Light Wavelenght Trainer....
Product Code: ETKN-0458 - (Monochromatic Light Wavelenght Trainer for Vocational Training and Didactic Labs)ABS Braking System Panel
This product is an educational trainer of a modern ABS braking system for automobiles. It is mounted on a sturdy stand with wheels and easily allows you to:
• Teach and describe all of the brake parts connected together to enable an easy understanding of the brake assembly operation.
• Outline each of the parts, which have been carefully sectioned for training purposes and painted for easy differentiation between the mechanical parts.
• Effortlessly move and store this trainer because of its compact and inclusive design.
SPECIFICATIONS:
• Self-ventilating disk brake with phonic wheel and sensor
• Rear disk brake with phonic wheel and sensor
• Servo brake with foot control panel and brake pump
• Electronic control unit
• Oil tank
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - Monoshot Multivibrator Trainer Monoshot Multivibrator Trainer....
Product Code: ETKN-0459 - (Monoshot Multivibrator Trainer for Vocational Training and Didactic Labs)Braking System Panel, Double Circuit
This trainer represents a double circuit braking system. The trainer is mounted on a panel and allows you to:
• Describe the operating parts of the braking system, which have been carefully sectioned to allow a clear view.
• Manually operate the system with a hydraulic pump connected to the disk brake and the drum brake.
• Avoid rear-wheel lock up during the braking phase with a braking adjuster positioned between the pump and the rear drum brake.
• Effortlessly use and display this model because of its compact and inclusive design.....
Equipment for Education, Engineering and Vocational Training - Monostable Multivibrator Trainer Monostable Multivibrator Trainer....
Product Code: ETKN-0460 - (Monostable Multivibrator Trainer for Vocational Training and Didactic Labs)Heavy-duty Hydropneumatic Braking System Panel
This trainer is a hydro-pneumatic braking system commonly found in heavy-duty trucks (tractor-trailer). It is connected to a wall mounted panel and easily allows you to:
• Conveniently educate about all of the braking system components, listed below.
• Teach and differentiate the particular parts of the system with the aid of color-coded rubber pipes to easily identify the various circuits.
• Effortlessly use and display this model because of its compact and inclusive design.
SPECIFICATIONS:
• Air compressor
• Triplex Marelli distributor with adjusting and control unit
• Pressure brake booster
• Tractor-trailer coupling joint
• Hydraulic control braking element
• Mechanical and air control braking element for parking braking
• Servo-distributor valve for the trailer
• Four air reservoirs (three for the tractor).....
Equipment for Education, Engineering and Vocational Training - Mosfet Characteristics Trainer Mosfet Characteristics Trainer....
Product Code: ETKN-0461 - (Mosfet Characteristics Trainer for Vocational Training and Didactic Labs)Compressed Air Braking System Panel, with Double Spring Brakes (On Stand with Wheels)
This trainer is a Turbo Star compressed air braking system with double spring braking unit and chuck drive. This unit is mounted on a stand with wheels and is complete with all the connection circuits components for braking systems. It allows you to:
• Clearly describe and teach the running of modern braking systems currently required by law (service brake, parking brake, and emergency brake).
• Teach and differentiate the particular parts of the system with the aid of color-coded connection pipes to easily identify the various circuits.
• Educate about both the E.E.C. Standard double braking system as well as the hydro-pneumatic and the braking system with the olive pilot, which are generally used on different light vehicles.....
Equipment for Education, Engineering and Vocational Training - Multimedia Computer Trainer Trainer Multimedia Computer Trainer Trainer....
Product Code: ETKN-0462 - (Multimedia Computer Trainer Trainer for Vocational Training and Didactic Labs)Compressed Air Braking System Panel, with Double Spring Brakes
This trainer is a Turbo Star compressed air braking system with double spring braking unit and chuck drive. This unit is a wall mounted panel, is complete with all the connection circuits components for braking systems, and allows you to:
• Clearly describe and teach the running of modern braking systems currently required by law (service brake, parking brake, and emergency brake).
• Teach and differentiate the particular parts of the system with the aid of color-coded connection pipes to easily identify the various circuits.
• Educate about both the E.E.C. Standard double braking system as well as the hydro-pneumatic and the braking system with the olive pilot, which are generally used on different light vehicles.....
Equipment for Education, Engineering and Vocational Training - Multivibrator Trainer Multivibrator Trainer....
Product Code: ETKN-0463 - (Multivibrator Trainer for Vocational Training and Didactic Labs)LPG Timed Sequential Injection
This trainer is a model of a Liquid Petroleum Gas (LPG) timed sequential injection system for a gas engine with multi-point electronic injection. It saves space as it is wallmounted and allows you to:
• Describe the use of the E.C.U, injection rail, L.P.G. solenoid valve, reducer – vaporizer, pressure sensor, and the other components listed below.
• Simplify the concepts and language with use of the terminology table.
SPECIFICATIONS:
• E.C.U.
• Injection rail
• L.P.G. solenoid valve
• Reducer – vaporizer
• Pressure sensor
• Pressure stabilizer
• Switch commutator
• Nozzles for manifold
• Water temperature sensor
• Gas temperature sensor
• Refueling valve
• Level indicator
• Comes with a terminology table.....
Equipment for Education, Engineering and Vocational Training - Multivibrators Trainer Multivibrators Trainer....
Product Code: ETKN-0464 - (Multivibrators Trainer for Vocational Training and Didactic Labs)Electronic Single-Point Injection System
This trainer is an electronic teaching aid designed to show the functioning of an electronic ignition system. This panel is mounted on a sturdy stand with wheels and allows you to easily:
• Regulate the RPM s from 0 to 2000 with the use of an attached pedal.
• Educate about the IAW Weber-Marelli single-point injection, self-contained engine management system, which controls both the fuel injection and ignition.
• Demonstrate to your students an entire fuel injection system comprised of: fuel tank, an electric fuel pump, a fuel filter, fuel supply and return lines, a throttle body with electronic fuel injector, an Electronic Control Unit (ECU), as well as the associated sensors, actuators and wiring.
SPECIFICATIONS:
• Fuel tank
• Fuel pump
• Fuel pressure regulator
• Injector
• Fuel vapour trap
• Idle stepper motor
• Absolute pressure sensor
• Injection/ignition ECU
• Throttle position sensor
• Engine coolant temperature sensor
• Intake air temperature sensor
• Injection/ignition duel relay
• Ignition coils
• Rpm and TDC sensor
• Spark plugs
• Diagnostic socket
• EVAP solenoid
• Lambda /oxygen sensor....
Equipment for Education, Engineering and Vocational Training - Multivibrators 1 Trainer Multivibrators 1 Trainer....
Product Code: ETKN-0465 - (Multivibrators 1 Trainer for Vocational Training and Didactic Labs)Electronic Injection Multipoints System Panel
This trainer depicts the functioning of and multi-point electronic injection system. It is mounted on a sturdy stand with wheels and easily allows you to:
• Regulate, by use of a pedal, the rpm from 0 to 2400.
• Effortlessly simulate the air pressure sensor in the collector as well as the water temperature.
• Generate sensor and actuator faults by disrupting the relative connections interface (standard with K line and 7 pins).
• Conveniently use and display this model because of its compact and inclusive design.
SPECIFICATIONS:
• Fuel Tank
• Fuel electro-pump
• Inlet fuel piping
• Electronic ECU injection-ignition
• Battery
• Feeding contractor system
• Fuel steams electro-valve
• Protection fuse of the injection-ignition system
• Activated carbon filter
• Diagnostic socket
• Absolute pressure and temperature sensor
• Rpm and PMS sensor
• Ignition spark plugs
• Cooling liquid temperature sensor
• Electro-injectors
• Positioning butterfly valve sensor
• Minimum rpm actuator
• Ignition coils
• Lambda probe (upstream)
• Lambda probe (downstream)
• Injection phase sensor
• On-off switch
• Feeding collector fuel
• OBD2 socket connection....
Equipment for Education, Engineering and Vocational Training - Mutual Inductance by Carey Fosters Method Trainer Mutual Inductance by Carey Fosters Method Trainer....
Product Code: ETKN-0466 - (Mutual Inductance by Carey Fosters Method Trainer for Vocational Training and Didactic Labs)ABS Simulator - Electrical
The electrical ABS Simulator was created to show how an ABS in a modern car operates. The simulator saves space as it sits on a table-top and allows you easily:
• Educate about how ABS operates in fully functioning condition or with multiple faults and disconnections.
• Instruct on how to detect low fluid level, measure pressure and different control signals, how a hydraulic ABS valve operates, how brake systems work, and more.
• Introduce your students to self-diagnostic control and fault diagnosis process.
• Access theoretical and practical study in the educational manual provided.
EXPERIMENTS:
How ABS Operates:
- with one wheel speed sensor disconnected
- when wheels are rotated at different speeds
- when wheels are rotated at same speed
- with destroyed hydraulic valve
- with hydraulic valve stuck
- with different relative speed turn of wheels
How to detect:
- low fluid level
How to measure:
- pressure during operation
- different control signals in the ABS system
How brake system works:
- when the electronic brake unit is disconnected
- when there is leakage
How Hydraulic ABS valve operates
Self-diagnostic control
Fault diagnosis process....
Equipment for Education, Engineering and Vocational Training - Mutual Inductance by Direct DeflectionMethod Trainer Mutual Inductance by Direct DeflectionMethod Trainer....
Product Code: ETKN-0467 - (Mutual Inductance by Direct DeflectionMethod Trainer for Vocational Training and Didactic Labs)Common Rail Direct Injection Simulator For Diesel Engine - Electrical
The simulator pictured above replicates the whole cycle of a common rail direct injection diesel engine on its panel. This simulator allows you to study the HDI (CDI-CR) injection system for diesel engines as well as:
• Analyze the fuel circuit as well as all of the components of the electrical / electronic control circuit.
• Simulate the desired behavior of the components and circuits which the instructor and students can control directly through the panel or a computer.
• Educate your students by using the analogue controls to keep the simulation completely under control while students continue working on the fault without interruption.
• Control the provided software to balance theory with practical experience, troubleshooting, and tests.
SPECIFICATIONS:
Common rail with:
• Electro-injectors
• Fuel pressure limiting valve
• Pressure sensor
Sensors for:
• Accelerator pedal position
• Over-supply pressure
• Air temperature
• Engine temperature
• Engine rpm
• Air mass
• Electronic control board
• Pneumatic actuator for the variable geometry turbine
• Computerized workstation connected to the management system
• Fuel tank with pre-filter
• High pressure electro-pump
• Flow limiter....
Equipment for Education, Engineering and Vocational Training - Mutual Inductance of Pairs of Coils Trainer Mutual Inductance of Pairs of Coils Trainer....
Product Code: ETKN-0468 - (Mutual Inductance of Pairs of Coils Trainer for Vocational Training and Didactic Labs)Turbo Diesel Truck Engine, Inline 4, without Turbosupercharger
This cut-away is a “Fiat” turbo diesel engine used in cars and cargo trucks with a 4-cylinder inline configuration and indirect injection, but without a turbosupercharger. The cut-away is mounted on a sturdy stand with wheels and allows you to:
• Observe the electronically powered engine move at a reduced speed for easy comprehension.
• Describe each of the parts, which have been carefully sectioned for training purposes.
• Educate about all separately painted mechanical segments, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Expect a longer life for the cut-away due to the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine; Inline 4 cylinder
• Displacement: 2,500 cc
• Indirect injection
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Gearbox: 5 forward speeds + reverse
• Water cooling
• Operates electrically at 120 volts
• Mounted on stand with wheels
• Compliance: CE Mark....
Equipment for Education, Engineering and Vocational Training - NAND Gate Encoder Trainer NAND Gate Encoder Trainer....
Product Code: ETKN-0469 - (NAND Gate Encoder Trainer for Vocational Training and Didactic Labs)Turbo Diesel Engine With Clutch & Gearbox, Rear Wheel Drive
This product is a cut-away of a front-drive diesel engine with a clutch gearbox on a sturdy stand with wheels. This is a 4-stroke, 4-cylinder in-line configuration engine that will allow you to:
• Observe its electronically powered movement at a reduced speed for easy comprehension.
• Differentiate each of the parts, which have been carefully sectioned for training purposes.
• Educate about all separately painted mechanical segments, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Expect a longer life for the cut-away due to the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine; 4 In-line cylinders
• Displacement: 1,300/1,700 cc
• Indirect injection
• Turbocharged
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Gearbox: 4 forward speeds + reverse
• Single-plate clutch with diaphragm
• Water cooling
• Operates electrically at 120 volts
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - Network Theorem Trainer Network Theorem Trainer....
Product Code: ETKN-0470 - (Network Theorem Trainer for Vocational Training and Didactic Labs)Diesel Engine With Clutch & Gearbox, Front Wheel Drive, Electrical Operation
This product is a cut-away of a front-drive diesel engine with a clutch gearbox on a sturdy stand with wheels. This is a 4-stroke, 4-cylinder in-line configuration engine that will allow you to:
• Observe its electronically powered movement at a reduced speed for easy comprehension.
• Differentiate each of the parts, which have been carefully sectioned for training purposes.
• Educate about all separately painted mechanical segments, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Expect a longer life for the cut-away due to the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine; 4 In-line cylinders
• Displacement: 1,300 cc
• Indirect injection
• Turbocharged
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Power: 45 hp
• Gearbox: 5 forward speeds + reverse + differential
• Single-plate clutch with diaphragm
• Water cooling
• Operates electrically at 120 volts
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - Network Theorem 1 Trainer Network Theorem 1 Trainer....
Product Code: ETKN-0471 - (Network Theorem 1 Trainer for Vocational Training and Didactic Labs)Diesel Engine With Clutch & Gearbox, Front Wheel Drive, Manually Operated
This product is a cut-away of a manually operated front-drive diesel engine with a clutch gearbox on a sturdy stand with wheels. This is a 4-stroke, 4-cylinder in-line configuration engine that will allow you to:
• Control, with precision, the speed of the engine with the use of a crank handle.
• Differentiate each of the parts, which have been carefully sectioned for training purposes.
• Educate about all separately painted mechanical segments, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Expect a longer life for the cut-away due to the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine; 4 in-line cylinders
• Displacement: 1300 cu. cm
• Indirect injection
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Power: 45 hp.
• Gearbox: 5 forward speeds + reverse and differential
• Single-plate clutch with diaphragm....
Equipment for Education, Engineering and Vocational Training - Newtons Law of Cooling Trainer Newtons Law of Cooling Trainer....
Product Code: ETKN-0472 - (Newtons Law of Cooling Trainer for Vocational Training and Didactic Labs)Diesel Engine for Small Car, Electrical Operation
This product is a cut-away of a small diesel engine for a car with a on a sturdy stand with wheels. This is a 4-stroke, 4-cylinder in-line configuration engine that allows you to:
• Observe its 120v electronically powered movement at a reduced speed for easy comprehension.
• Differentiate each of the parts, which have been carefully sectioned for training purposes.
• Educate about all separately painted mechanical segments, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Use it for an extended period due to the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine; 4 in-line cylinders
• Displacement: 1300 cc
• Indirect injection
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Power: 45 hp.
• Water cooling
• Mounted on stand with wheels
• Operates electrically at 120V....
Equipment for Education, Engineering and Vocational Training - Newtons Rings Experiment Trainer Newtons Rings Experiment Trainer....
Product Code: ETKN-0473 - (Newtons Rings Experiment Trainer for Vocational Training and Didactic Labs)Diesel Engine for Small Car, Manual Operation
This product is a cut-away of a small diesel engine for a car with a on a sturdy stand with wheels. This is a 4-stroke, 4-cylinder in-line configuration engine that allows you to:
• Operate the cut-away manually via hand crank to see how the engine runs
• Differentiate each of the parts, which have been carefully sectioned for training purposes.
• Educate about all separately painted mechanical segments, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Use it for an extended period due to the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine; 4 in-line cylinders
• Displacement: 1300 cc
• Indirect injection
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Power: 45 hp.
• Water cooling
• Mounted on stand with wheels
• Operated manually by hand crank....
Equipment for Education, Engineering and Vocational Training - Null Balancing Techniques of OP Amp Trainer Null Balancing Techniques of OP Amp Trainer....
Product Code: ETKN-0474 - (Null Balancing Techniques of OP Amp Trainer for Vocational Training and Didactic Labs)Turbo Diesel Engine, 16 Valve Chrysler Jeep
This cut-away is an electronically operated 16-valve Chrysler Jeep Dodge turbo diesel engine with common-rail intercooler mounted on a stand with wheels. Using this cut-away allows you to:
• Use its reduced speed operation to teach about all of the moving mechanical parts.
• Point to each of its carefully sectioned parts to train your students.
• Easily differentiate between the color-coded cross-sections, cooling system, lubricating circuits, fuel system, etc.
• Expect a longer life for the cut-away because of the many chromium plated and galvanized parts.
SPECIFICATIONS:
• 4 stroke engine 4 In-line cylinders
• Displacement: 2,500/2,800cc
• Power: 150-170 hp at 4000 rpm
• Twin overhead camshaft (DOHC) with timing belt
• 4 valves per cylinder
• Troidal oil pump
• Common rail-type direct injection with electronic injectors
• Turbocharger with air-air intercooler
• Alternator, oil filter and oil pump
• Operates electrically at 120 volts
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - Null Detector Trainer Null Detector Trainer....
Product Code: ETKN-0475 - (Null Detector Trainer for Vocational Training and Didactic Labs)Turbo Diesel Truck Engine With Direct Fuel Injection
This product is a cut-away of a turbo diesel, 4-cylinder engine with in-line configuration and direct fuel injection with moving mechanical parts. This type of engine is used in cars or cargo trucks and allows you to:
• Teach about the engine while it moves electronically at a reduced speed.
• Effortlessly display and move the cut-away thanks to its sturdy stand and wheels.
• Expect a longer life for the cut-away because many of the parts have been chromium plated and galvanized.
• Easily describe each of the parts, which have been carefully sectioned for training purposes and painted for easy differentiation between the mechanical parts, cross-sections, lubricating circuits, fuel system, cooling system, etc.
SPECIFICATIONS:
• 4 stroke engine; In-line 4 cylinder
• Displacement: 2,500cc
• Direct injection
• Turbocharged
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Intercooler water-oil
• Water cooling
• Operates electrically at 120 volts
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - OP-Amp Applications Trainer OP-Amp Applications Trainer....
Product Code: ETKN-0476 - (OP-Amp Applications Trainer for Vocational Training and Didactic Labs)Turbo Diesel Truck Engine, Inline 4, Indirect Injection, without Gearbox
This product is a cut-away of a turbo diesel, 4-cylinder engine with in-line configuration and indirect fuel injection with moving mechanical parts. This type of engine is used in cars or cargo trucks and allows you to:
• Teach about the engine while it moves electronically at a reduced speed.
• Effortlessly display and move the cut-away thanks to its sturdy stand and wheels.
• Expect a longer life for the cut-away because many parts have been chromium plated and galvanized.
• Easily describe each of the parts, which have been carefully sectioned for training purposes and painted for easy differentiation between the mechanical parts, cross-sections, lubricating circuits, fuel system, cooling system, etc.
SPECIFICATIONS:
• 4 stroke engine; Inline 4 cylinder
• Displacement: 2,500cc
• Indirect injection
• Turbocharged
• VE Bosch type rotary injection pump
• Overhead camshaft (OHC)
• Distribution through a toothed belt
• Alternator
• Thermostatic valve
• Water/Oil Intercooler
• Water cooling
• Operates electrically at 120 volts
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - OP Amp Characteristics Trainer OP Amp Characteristics Trainer....
Product Code: ETKN-0477 - (OP Amp Characteristics Trainer for Vocational Training and Didactic Labs)Turbo Diesel Truck Engine, Inline 6, with Intercooler
This product is an electronically controlled cut-away of a turbo diesel truck engine with an inline 6- cylinder configuration, direct injection, and intercooler. Use of this cut-away will allow you to:
• Use at a reduced operating speed to teach about all of the moving mechanical parts.
• Point to each of its carefully sectioned parts to train your students.
• Easily differentiate between the color-coded cross-sections, lubricating system, cooling system, fuel system, etc.
• Easily display and move the cut-away thanks to its sturdy stand and wheels.
SPECIFICATIONS:
• 4 stroke engine; Inline 6 cylinder
• Displacement: 5,200cc
• Direct injection
• Bosch type in-line injection pump with mechanical governor
• Air/air Intercooler
• Camshaft in the crankcase
• Spring single-plate clutch
• Turbocharged
• Gearbox: 4 forward speeds + reverse
• Gear distribution
• Operates electrically at 120 volts
• Mounted on stand with wheels....
Equipment for Education, Engineering and Vocational Training - OP Amp as Comparator Trainer OP Amp as Comparator Trainer....
Product Code: ETKN-0478 - (OP Amp as Comparator Trainer for Vocational Training and Didactic Labs)Turbo Diesel Truck Engine, V8, Direct Injection, with 2 Turbosuperchargers
This cut-away is a 8-cylinder (V-8) turbo diesel truck engine with direct injection and superchargers mounted on a sturdy stand with wheels. This cut-away will allow you to:
• Observe the engine move at a reduced speed because its powered electronically.
• Describe each of the parts, which have been carefully sectioned for training purposes.
• Differentiate between the differently painted mechanical parts, cross-sections, lubricating circuits, fuel system, cooling system, etc.
• Expect it to last for years to come because many parts have been chromium plated and galvanized.
SPECIFICATIONS:
• 4 stroke engine; V8
• Displacement: 17,200cc
• Power: 380 hp
• Direct injection
• Bosch type in-line injection pump with mechanical governor
• Water/oil Intercooler
• 4 valves per cylinder
• Camshaft in the crankcase
• 2 Turbochargers
• Geared distribution
• Operates electrically at 120 volts
• Mounted on stand with wheels
• Compliance: CE Mark....
Equipment for Education, Engineering and Vocational Training - OP Amp as Differentiator and Integrator Trainer OP Amp as Differentiator and Integrator Trainer....
Product Code: ETKN-0479 - (OP Amp as Differentiator and Integrator Trainer for Vocational Training and Didactic Labs)
