Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the
metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a
perfectly stable Retort Stand.
Material :Polystyrene / Polypropylene
Size: 225x150mm-Side Hole
Size: 300x200mm-Centre Hole
Size: 300x200mm-Side Hole....
These Polypropylene / Polystyrene tubes are generally used in RIA, Coagulation & Becteriology. The
Polyproplene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes
can accept common acids, alkalies and solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvants.
Material :Polypropylene / Polystyrene
Size: 12 x 75mm/ PS
Size: 12 x 75mm/ PP
Size: Cap for 12mm RIA
Tube....
These polypropyle vials are unique because the cap fitted with an O ring can be screwed into the
vial making it a leakproof vial which can be used in RIA, Coagulation & Bacteriology etc.
Material :Polypropylene / Polystyrene
Size: Capacity 12 x 75mm....
Made for polypropylene, these disposable containers are used for collecting samples of
sputum ou urine etc. Graduated on the outer surface, these containers have cap that works in a press & fit manner & make these containers leakproof.
These disposable containers are E.T.O. sterlized.
Material :Polypropylene
Size: 50 ml, 25 ml....
These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can
be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.
Material :High Density
Polyethylene
Size: 8ml, 20ml....
This Seperatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This
pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push
fitted to the stem of the seperatory funnel.
Material :Polypropylene
Size: 100ml
Size: 250ml
Size: 500ml....
This non-corrosive Seperatory Funnel Holder, moulded in Polypropylene, has a front opening which
provides cleas view of the solution and allows unobstructed placement of sperating funnels. Two tapered wedges are provided to ensure firm grip on rods
having dia 1/2" or 3/8".
Material :Polypropylene....
Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in
Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durable than the one used
conventionally.
Material :Polypropylene....
These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides. Heavy walls
will not wrap, splinter or crack. Boxes are unaffected by humidity and are throughly insect proof. Base of the slide box has a numbered index for easy slide
Identification.
Material :Polystyrene
Size: 25 Slides
Size: 50 Slides
Size: 100 Slides....
Slide Mailers present the best option to carry prepared slides from one place to another.Moulded in
Polypropylene, these Slide Mailers are available in two sizes i.e. 2 slides and 5 slides.
Material :Polypropylene
Size:
1 Slides
Size: 2 Slides
Size: 5 Slides....
Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100
slides, recognizable through the numeric indexing.
Spacing between the slots provide adequate backward & forward movement of slides
for convenient recognition. The transparent cover provide excellent view of the slides stored inside.
Material :Acrylonitrile Butadiene
Styrene
Size: 100 Slides....
This non-toxic disposable loop is accurate to semi quantitative stand for handling samples
Material :Polypropylene
Size: Soft loops - 1ul
Size: Soft loops - 10ul....
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with
a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
Material :Polypropylene
Size: 150mm
Size: 200mm....
Moulded in Polypropylene, this Staining Box helps in staining, fixing, de-staining and handling fragile
electro- phoresis gels and membranes. Box as well as cover will resist temperatures from - 70° C to +70 ° C. The LDPE plug provides leakproof seal
and allows easy liquid drainage.
Material :Polypropylene
125 x 125 x 50mm.....
Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These
Stirrers prove to be tough and long lasting.
Material :Polypropylene
Size: Ø- 10mm x h-250mm
Size:
Ø- 7mm x h-250mm
Size: Ø- 7mm x h-200mm
Size: Ø- 7mm x h-300mm....
These containers, are used for collecting stool samples. The cap is provided with a spoon like structure
that proves helpful in lifting samples.
Material :Polypropylene
Size: 30 ml
Size: 60 ml
NPLW-0097A: This Stool Container has the unique feature of one piece moulded cap-spoon combination.
Material :Polypropylene
Size: 25 ml.....
These polypropylene Stop Cocks are fitted with a Poly Tetra Flouro Ethylene (PTFE) plug & have serrated
tubulations that accept from 6mm to 10mm tubing.
These Stop Cocks are absolutely leakproof and are available in two different options
i.e. 2 ways & 3 ways.
Material : Polypropylene / Poly Tetra Flouro Ethylene(PTFE)
Size: 2 Way, 3 Way....
These Storage Boxes, made of Polypropylene, prove to be an excellent option for storage of different
powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in two different sizes,
these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.
Material :Polypropylene
Size: 250ml, 500ml, 1000ml
STORAGE VIAL: NPLW-0100
As the name suggest, these vials are
commonly used for storage of biological material, human & animal cells at temperature as low as -190°C. The Cap is provided with a built in seal ring
making the vial leakproof. The base of the vial has longitudonal grooves which gives it a non-twisting character when placed in a vial rack.
Material : Polypropylene / Popyethylene
Size: 1.0ml
Size: 2.0ml
Size: 5.0ml....
As the name suggest, these vials are commonly used for storage of biological material, human & animal
cells at temperature as low as -190°C. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudonal
grooves which gives it a non-twisting character when placed in a vial rack.
Material : Polypropylene / Popyethylene
Size: 1.0ml
Size: 2.0ml
Size: 5.0ml....
This vial has an O-ring in the cap that makes it absolutely leakproof. Like other storage vials
this vial can also be used for storage purposes at temperatures as low as -190°C.
Material :Polypropylene / Popyethylene
Size: 2.0ml....
Another addition to the range of storage vials is this vial which has internal thread in it.
The cap fitted with an O-ring screws in to the vial and makes it a leakproof storage vial.
Material :Polypropylene / Popyethylene
Size: 2.0ml
NPLW-0102A-SV10-SV5: These polyprolylene vials add to the existing range. Available in 5ml & 10ml
capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial. Just like others storage vials these vials are also used
for the storage of biological material, animal & human cells etc.
Material :Polypropylene
Size: 10 ml
Size: 5 ml....
Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets
are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterlization or incubation.
Material :Polypropylene
Size: 140x120x110mm
Size: 160x160x160mm
Size: 400x400x100mm....
These polypropylene tubes excellent option for RIA, coagulation & bacteriology etc. The cap
in screwed on to the tube & hence this tube can be filled up to the brim.
Material :Polypropylene / Polystyrene
Size: 16 x 100mm Ext. Thread....
This transparent polypropylene cap for Test Tubes Proves to be an excellent protection to the contents to
the tubes.The grooves inside the cap tighten the fitting on the tube while the outer groove wouldhold identification labels.The built in seal ring would set
in the tube making the combination a leakproof one.
Material :Polypropylene
Size: Cap for Test Tube ø 25 mm....
This autoclavable Stand is perhaphs the most commonly used Test Tube Stand in various laboratories. For
better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia
tubes where as the base has corresponding hemispherical well. It also has six vertical pins for drying tubes. Another option available in this section is a
test tube stand in which all the holes in the top plates can hold 25mm dia tubes.
Material :Polypropylene....
A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four
25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 verticalpins for drying tubes surrounded by a
trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.
Material :Polypropylene....
An economical substitute for wire racks, here are these submersible, autoclavable racks
which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath
and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purpose. The base is in the form of a
grid with square openings and fold up sides and end bars that lock into rack tops.
Material :Polypropylene
Size: 16mm
x 60Tubes
Size: 20mm x 40Tubes
Size: 25mm x 24Tubes
Size: 20mm x 40Tubes
Size: 25mm x 24Tubes....
These ingenious racks with a 3-tier design provide clear view of the tube contents &
convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque.
These autoclavable Racks can withstand sub-freezing temperatures.
Material :Polypropylene
Size: 13mm x 31 Tubes
Size: 16mm x 31 Tubes
Size: 20mm x 20 Tubes
Size: 25mm x 12 Tubes
Size: 25mm x 18 Tubes
Size: 32mm x 12 Tubes
Size: 25mm x 36 Tubes
Size: 15mm x 18 Tubes
Size: 18mm x 12 Tubes
Size: 13mm x 62 Tubes
Size: 16mm x 62 Tubes
Size: 20mm x 40 Tubes
Size: 13mm x 48 Tubes
Size: 13mm x 72 Tubes....
These ingenious racks with a 3-tier design provide clear view of the tube contents &
convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque.
These autoclavable Racks can withstand sub-freezing temperatures.
Material :Polypropylene
Size: 13mm x 31 Tubes
Size: 16mm x 31 Tubes
Size: 20mm x 20 Tubes
Size: 25mm x 12 Tubes
Size: 25mm x 18 Tubes
Size: 32mm x 12 Tubes
Size: 25mm x 36 Tubes
Size: 15mm x 18 Tubes
Size: 18mm x 12 Tubes
Size: 13mm x 62 Tubes
Size: 16mm x 62 Tubes
Size: 20mm x 40 Tubes
Size: 13mm x 48 Tubes
Size: 13mm x 72 Tubes....
This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this
rack can be used for tubes of ¢30mm, ¢20mm, ¢17mm & ¢12mm
Material : Polycarbonate....
This Universal Reagent Reservoir is a graduated single reagent reservoir with maximmum volume
of 50ml, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5 ml. reagent channels. Made of polypropylene
these reagent reservoirs are repeatedly autoclavable and can be used with all multi-channel pipettes.
Material :Polypropylene
Size: 50 ml....
These containers can be used for collecting a wide range of smaples of sputum, urine etc. Moulded in
polypropylene these contianer have excellent contact clarity and the cap has built in seal that makes it completely leakproof.
Material
:Polypropylene
Size: 30 ml
Size: 60 ml....
Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name
suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.
Material :Polypropylene
Size: 375 x 350 x 130mm....
This Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity.
These autoclavable flasks are provided with screw caps to prevent leakage.
Material :Polypropylene
Size: 25ml, 50ml,
100ml, 250ml, 500ml, 1000ml....
This Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent &
unbreakable character. Solutions can be poured easily by sueezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can
be aimed wherever required.
Material : Low Density Polyethylene
Size: 125 ml, 250 ml, 500 ml, 1000 ml....
Bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable.
The distinguishing feature that these bottles contains is the builtin delivery tube making it a one-piece Wash-Bottle. These Bottles are graduated on the
outer surface to give an approximate idea about the volume of solution filled or dispensed.
Size: 125 ml, 250 ml, 500 ml
Material : Low Density Polyethylene....
This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals
& reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The buil in depressions on two sides provide excellent
grip while holding this bottle.
Material :Polyproplyne
Size: 4000 ml....
These wash bottles made of polyethylene have wide mouth that enables easy fillings as well as
cleaning. The unique feature of the cap is through the top closure and stem moulded in one piece.
Material : Low Density Polyethylene
Size: 500 ml....
Student Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0001 - (Student Microscope for Science Lab)
Medical Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0002 - (Medical Microscope for Science Lab)
Dissecting Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0003 - (Dissecting Microscope for Science Lab)
Stereo Binocular Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0004 - (Stereo Binocular Microscope for Science Lab)
Zoom Stereo Binocular Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0005 - (Zoom Stereo Binocular Microscope for Science Lab)
Zoom Stereo Trinocular Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0006 - (Zoom Stereo Trinocular Microscope for Science Lab)
PENTA Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0007 - (PENTA Microscope for Science Lab)
Vernier Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0008 - (Vernier Microscope for Science Lab)
Coaxial Binocular Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0009 - (Coaxial Binocular Microscope for Science Lab)
Coaxial Binocular Microscope (STD) Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0009A - (Coaxial Binocular Microscope (STD) for Science Lab)
Coaxial Trinocular Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0010 - (Coaxial Trinocular Microscope for Science Lab)
Inclined Monocular Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0011 - (Inclined Monocular Microscope for Science Lab)
