Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Compact Spinal Brace
.... Product Code: HMEDLAB-REHT-10003 - (Compact Spinal Brace)
Electric Suction Machine MS Stanvac
.... Product Code: HMEDLAB-SUCT-10003 - (Electric Suction Machine MS Stanvac)
X-Ray Cassette Film Cart NaugraExport India
.... Product Code: HMEDLAB-XRAY-10003 - (X-Ray Cassette Film Cart)
Water Still Table Model SS (Barnstead Type)
.... Product Code: HMEDLAB-WSHL-10003 - (Water Still Table Model SS (Barnstead Type))
Safety Sampling System Triple
.... Product Code: HMEDLAB-BLOD-10003 - (Safety Sampling System Triple)
Female Pelvis Model Pregnant Section with Fetus
.... Product Code: HMEDLAB-CHRT-10003 - (Female Pelvis Model Pregnant Section with Fetus)
Horizontal Chain & Rope Testing Machines For Testing Lab for Tensile Testing Lab....
Product Code: TEST-TTM-03 - (Horizontal Chain & Rope Testing Machines For Testing Lab for Tensile Testing Lab)
Large spherical dome for generating high voltage. Motor-driven insulating belt. Van De Graaff Generator - Large spherical dome for generating high voltage. Motor-driven
insulating belt. Van De Graaff Generator is a standard apparatus for
demonstrating the presence of static electricity. Overall, the concept
of Van De Graaff Generator is very simple. A belt passes over two
rollers, made of different materials (teflon & aluminum). Two metal
combs are held near the belt surface and the lower roller is attached to
the electronic motor. This device harnesses an effect called
Electrostatic Induction in order to pump electrical charge. These
electrical charges get accumulated on the surface of aluminum dome. As a
result sparks are seen if the grounded aluminum sphere is brought near
the dome, depicting the phenomenon of corona discharge.
Large spherical dome for generating High Voltage
Motor-driven insulating Belt
Easy to Operate
Low Cost
Learning material CD....
Reynolds Number Demonstrator - Self Contained unit
Easy Operation. Study and verification of Reynolds Number, Study of different patterns of fluid flow, Study of drag force in fluid.
....
Wind Energy Trainer - Complete setup to study the fundamentals of wind based DC power generator. On board voltmeter and ammeter are provided.
....
Diode Characteristics Trainer -
....
Home Electrical Wiring Training System Trainer - Easy diagrammatic representation of circuits, Energy Meter, Voltage and Current display on Graphical LCD (128x64)....
Product Code: EET-TR-03 - (Home Electrical Wiring Training System Trainer)
FPGA Development Platform - XILINX Spartan3,FPGA ,400K Gates,8064 logic cells). I/O ports 136, Number of pins 208....
Product Code: VLS-TR-03 - (FPGA Development Platform for VLSI Design Training Systems Teaching Labs)
FM Transmitter Receiver Trainer - FM Transmiter Receiver Kit - FM Transmitter Receiver Trainer: Internal 300Hz to 3.4KHz sinewave generator. FM Modulation using reactance Modulator & Varactor Modulator. Transmitter Frequency to 455 KHz. FM Demodulator using detuned Resonant detector, Quadrature detector. Fooster seeley detector, Ratio detector & PLL detector. Low Pass filter with cut off frequency of 3.4KHz.....
Product Code: COM-TR-03 - (FM Transmitter Receiver Trainer for Communication Teaching Labs)
Power Supply Trainer – The Power Supply Trainer NV6003 is a comprehensive training system for
the laboratories. It is useful in understanding the various concepts of a
DC Power Supply. As we know that power supply is a very basic element
of any electronic circuit or appliance. Starting from a mobile charger
to a huge Computer system, each needs an efficient Power Supply. It is
essential for an engineer to know basic concepts of Electronic Power
Supplies.
This trainer describes the Transformer, Rectifiers, Filters, Regulators,
Role of Bleeder resistor, Load and Line regulation etc. While
performing any experiment students have to connect the links by patch
cords so it is very helpful for students to learn the inputs and
Real time appearance of components
Test points are provided in different sections of Power Supply
Demonstration bridge
Designed by considering all the safety standards
Provided with a detailed Operating manual
Low cost yet including many experiments....
SCR Triggering Circuits - Three firing circuits on single board.
Gradual firing angle control. Test points for observe output of different circuits.....
DSP Trainers - DSP, or Digital Signal Processing, as the term suggests, is the processing of signals by digital means. A signal in this context can mean a number of different things DSP is concerned with the representation of the signals by a sequence of numbers or symbols and the processing of these signals. DSP includes subfields like: audio and speech signal processing, sonar and radar signal processing, sensor array processing, spectral estimation, statistical signal processing, digital image processing, signal processing for communications, biomedical signal processing, seismic data processing, etc.
Our DSP Trainer is solution for establishing DSP based Lab, Basically the lab is designed to learn about the signal processing in Digital Domain. DSP Trainers is equipped with complete set of Hardware and Software to perform DSP experiments. Lab includes Speech, Audio, Communication, Signal Processing MATLAB/ Simulink interface for code generation. Program is written in assembly and C language. Expansion connectors to interface daughter board. 5VDC power supply.....
8086 Microprocessor Trainer - 8086 Microprocessor Trainer product based on 8086 Microprocessor for
purpose of training and development of Microprocessor based systems. It
provides a simple platform for the students to learn the concepts of
8086 architecture, its assembly language programming, interfacing and
working of different peripherals used in 8086 based system. The training
board is very user friendly and self contained allowing students to
carry out practical work and gain knowledge about Microprocessor based
systems.
Diagrammatic representation of full system
Powerful monitor program
Battery backup for RAM
Three channel Timer/ Counter using 8253
72 I/O lines are provided through 8255
Two modes of command
HEX key pad mode
Serial mode
Facility of downloading and uploading the files forms PC
All Address and Data lines are provided on 50 pin connector
8089 I/O Processor(optional)
8087 Math Coprocessor (optional)
e- Manual....
Respiration-Rate Monitor - 3½ Digit Digital display of breaths/minute. User selectable buzzer for abnormality indication.....
Product Code: BMO-TR-03 - (Respiration-Rate Monitor for Bio Medical Teaching Labs)
Mini Process Control Demonstrator - Mini Process Control Demonstrator - In this modern era, instrumentation
& control engineering have major share in the industrial growth,
whilst process control is a vital concept of it. The functionality and
complexity of process control have been increased. Mini Process Control
Demonstrator Nvis 3002 explains students and professionals the concepts
and working of thermal process control which enables them to learn
advance and more complex thermal process; and contribute in the growth
of instrumentation arena. It formulates students to accumulate, develop
and practice the fundamentals of thermal process control. Mini Process
Control Demonstrator Nvis 3002 has sensors like temperature sensor,
liquid level sensor, level indicators. Additionally it has safety
measures too such as emergency shutdown and overheat protector. There is
a wide range of experiments that can be performed on the trainer. It
also has facility of computer interfacing with real time graphical
analysis which helps to perform mathematical calculations required to
state stability of process using methods like root locus, bode plot,
etc. This feature increases the scope of doing research and implementing
one s innovative ideas related to thermal process control. Study of
processor with two position controller, PID controller and optionally
with PLC can be done.
Study of Thermal Process Control
Temperature Controller
Use of Industrial Process Control Elements
Signal Conditioning
Control Quality and Optimum Control
Process Loop Tuning & Stable Process
Real-time PC interface with ADC & Digital input/output
Process Control by ON/OFF Controller
Process Control by PID with Auto Tuning
Optional process control by using PLC
Process Control Loops
Mathematical Modeling and Calculations
Stability of Process using Root Locus, Bode Plot , etc
Process Indicators
PC Interface for Open Loop & Closed Loop Control
PC Based Temperature Indicator
Print and Save Feature for Real Time Data and Graph
Real Time Graphical Representation
User Friendly Software
Exhaustive Course Material & References
Learning material CD....
Microprocessor Flame Photometer is an ideal instrument for the determination of Sodium, Potassium, Calcium and Lithium in single aspiration of sample. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. It has soft touch membrane keys for ease of operation. The solution is aspirated through an atomiser. Air, sample and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass the photo-detector. The output of the photo-detector is then processed by the microcontroller and the final results displayed on the digital display. The 5 point calibration facility and non-linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of multiple standards once a calibration has been performed. FEATURES : µP based with Printer Interface Four element measurement in single aspiration of the sample Calibration Curve Programmability Curves saving facility Samples Data Storage Facility Printer/ Attachment Facility Measurement in ppm and meq Useful for both medical and soil testing applications. Compression unit: Air Supply : By oil free mini compressor unit with pressure regulator Combustion Gas LPG : Controlled by precision regulator Power : 230V ±10%AC, 50 Hz....
Product Code: NAAY-M3 - (Microprocessor Flame Photometer)
Cylindrical Measures for Aggregate Testing - It Determines Bulk Density or unit weight of aggregates. It consists of a Calibrated Cylindrical Measures of sheet iron with handles. Capacities available 3 litres, 5 litres, 7 litres, 15 litres & 30 litres. Complete with One Tamping Rod 16mm dia x 600mm long both ends rounded.....
Product Code: NATM-M3A - (Cylindrical Measures For Testing Lab for Aggregate Testing Lab)
Ring & Ball Apparatus (Electrical) for Bitumen Testing - Electrical heating, with a Heater and Energy Regulator, Suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply. Each unit is supplied with bath of heat resistant glass and the following. - Tapered Rings, 2 Nos. - Ball Centering Guide, 2 Nos. - Steel Ball, of 9.5mm dia, 2 Nos. - Ring Holder, 1 No. - Electric Heater (Hot Plate), 1 No. ESSENTIAL ACCESSORIES : Thermometer IP 60 C , Range : -2oC to 80oC.....
Product Code: NBTE-M3 - (Ring & Ball Apparatus (Electrical) For Testing Lab for Bitumen Testing Lab)
Equopen Swiss Portable Hardness Tester for NDT Metal Testers - Simple one-handed operation. Fast accurate hardness test. Compact, lightweight and portable. Self contained no cables. Displays directly in Rockwell C scale Application Range : 1. Ideal for consultants, machinists, quality and production personnel with periodic requirements for quick and easy hardness measurements in HRC 2. Measures 20 - 70 HRC, ± 1 HRC 3. Parts weighing less than 5 kg (11 lbs.) with thin walls must be set on a solid support to prevent vibrations 4. Parts weighing less than 2 kg (4.5 lbs.) must be coupled to a solid support using coupling paste 5. Minimum surface layer thickness: 0.7 mm 6. Minimum test radius of surface curvature: R = 30 mm (1.18 in.) 7. Steel and cast steel, cold work tool steel, stainless steel and hightemperature resistant steel....
Product Code: NANM-M3 - (Equopen Swiss Portable Hardness Tester For Testing Lab for NDT Metal Testers Lab)
Rock & Concrete Cutting Machine for Rock Lab Testing - Electrically operated with cooling system. Put simply, the stone or tile you cut must fit perfectly, just as the machine and the blade you use must fit your work situation perfectly. Universal table saw with a unique super-stable height adjustment device, lockable in any position. max. cutting depth in top position is 230 mm, by turning the material over.....
Product Code: ROKQ-03 - (Rock & Concrete Cutting Machine For Testing Lab for Rock Testing Lab)
Abel Flash Point Apparatus - Abel Flash Point Apparatus with NPL Certificate Electrical Heating, with gas test jet and electric heater with Energy regulator. Suitable for operation on 220V, single phase, 50 Hz, AC supply. For determining closed cup flash point of petroleum products, their mixtures, other liquid and paints, having flash points between 19° C and 49° C. Each instrument bears a test certificate of the National Physical Laboratory & is supplied complete with an oil cup for Oil, Petroleum & Paint Testing - cover fitted with gas test jet assembly, water bath and tripod stand, but without thermometer, in a wooden carrying case. Abel Flash Point Apparatus same asabove but without NPL Certificate. Replacement Part with NPL Certificate - Abel Oil Cup with lid, shutter and gas test jet brass. Optional Extras - Heating Element - Abel oil cup thermometer, IP 74 Range: -35°C to + 70°C - Abel water bath thermometer IP 75, Range: -30° C to + 80° C....
Product Code: NPPT-M3 - (Abel Flash Point Apparatus For Testing Lab for Oil, Petroleum & Paint Testing Lab)
A simple mould which is filled with the soil under test for Soil Testing - This is then dried and the resulting decrease os length of the specimen measured is expressed as the linear shrinkage. It is 25mm Dia. x 12.5mm Height x 140mm Length.....
Product Code: NSOL-T3 - (Linear Shrinkage Mould For Testing Lab for Soil Testing Lab)
Dumpy Levels for Surveying Testing - Quick setting dumpy level with erect image, 20x magnification, in plastic carrying case. Length case. Length 225mm/175mm. Complete with wooden or aluminium folding tripod. Axis made up of aluminium & brass.....
Product Code: NSUV-Y3 - (Dumpy Levels For Testing Lab for Surveying Testing Lab)Southard Viscometer for Concrete Testing - Putty consistency can be adjusted using this instrument. A 50mm I.D. metal cylinder is mounted on a wooden platform. A close fitting piston moves up to down without turning in this cylinder. Working stroke is 65mm. A metal bridge is provided to measure supplied complete with lime putty density vessel.....
Product Code: NCOT-C3 - (Southard Viscometer For Testing Lab for Concrete Testing Lab)
VICAT Needle Apparatus for Cement Testing - This instrument is used for determining the normal consistency and setting times of cement and \'A\' class limes. The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.....
Product Code: NCMT-E3 - (VICAT Needle Apparatus For Testing Lab for Cement Testing Lab)
SCHMIDT Test Hammer Type DIGI-SCHMIDT: Measuring range 10 (ND) / 18 (LD) to 70 compressive strength. Rebound values are measured by an electronic method and may be read directly as compressive strength values.....
Product Code: NDTE-C3 - (SCHMIDT Test Hammer Type DIGI-SCHMIDT For Testing Lab)
Digital Trainer Kit 03 - 10 Logic Level Inputs & 10 LED for output indication. Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz. Logic Pulsar, Logic Probe 4 digit 7 Segment Display Bread Board of 1260 tie points Fixed DC +5V, ±12V power supply. All interconnections are made using 2mm banana Patch cord.....
Product Code: DAT-TR-03 - (Digital Trainer Kit 03 for Digital Analog Teaching Labs)
Universal IC Tester TR-03: Can test more than 1500+ ICs Tests a wide range of digital IC\\\'s such as 74 Series, 40/45 Series, 8085, 8086, Z80 ,8255, 8279, 8253, 8259, 8251, 8155, 6264, 62256, 8288, 8284 Tests a wide range of analog IC\'s such as Op-amps, Timers, Transistor Arrays, Analog switches, Opto- couplers, ADC, DAC, Voltage Regulator, etc Tests 7- segment display of common cathode & common anode type Auto search facility of all Digital ICs 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display.....
Product Code: DIC-TR-03 - (Universal IC Tester TR-03 for IC Tester & Digital Teaching Labs)
Universal Programmer Tester - Device supports more than 15000+ devices, 48 Pin ZIF socket with universal pin-drivers. to supports 8-pin to 40-pin DIP package device - USB Interface to LAPTOP & PC. - High speed programming, Cost effective Hardware and Flexible Software....
Product Code: EPM-PR-03 - (Universal Programmer Tester for Eprom Programmer Teaching Labs)
Advanced Fiber Optics Trainer One 660 nm FO LED transmitter and Two FO photo detector Receivers. On-board Sine wave generator 1Hz to 10Khz. Analog & digital transmission & reception. 350 KHz Analog and 5 KHz Digital Band Width. 6 channel TDM Modulation Techniques using PCM CODEC Chip RS-232 communication with PC CODEC Link using Two Telephone Hand set provided....
Product Code: FOP-TR-03 - (Advanced Fiber Optics Trainer 660 for Fiber Optics Communication Teaching Labs)
Telephone Trainer - LED indication provided for LINE IN, HOOK, TONE and RINGER. Tone with Frequency of 430Hz and pulse dialer are provided through switch. 4 x 3 Matrix Keyboard Containing 0 - 9, # & * . Mute, Redial, Flash and On/Off Hook switches. Dialer and Ringer section with Ringer Volume control through Potentiometer.....
Product Code: ACT-TR-03 - (Telephone Trainer for Advance Communication Teaching Labs)Planck's Constant Experiment By LED's for Physics Lab....
Product Code: HS-LAB0003 - (Planck's Constant Experiment By LED's for Physics Lab for High School Science Kits Lab)
for Electric Motors Teaching Labs DC Machines have been the running horse for the Industry since 100 Years, Compound motors are one of these types. This Model is the Industrial/Educational model suitable for demonstrating to students the complete know of the Basics, Components, Starting methods, Wear & Tear & Maintenance of these motors packaged in small rating. Students can make connections of their own with the help of the terminations provided for study of features viz Starting methods, Speed control, Speed-Torque, Effects of Field voltage, Effects of Armature voltage, Over compound, Under compound, Motor/Generator operation. Technical Specs : Power ratings available : 350W / 750W / 1KW /2 KW / 3KW/ 5KW Voltage Input: 220V DC Excitation : 220V DC Armature : 220V DC RPM: 1500 / 3000 RPM Single / Double shaft extension, SPDP, IP23, IC01, B3, Class-B, S1, Solid yoke List Of Experiments Behavior of Resistance Cut off method of starting Behavior of Voltage control method of starting Speed Control & Over speed operations Load test & No load test of machine Speed-Torque Analysis Voltage-Speed Analysis Efficiency Analysis Over Compound & Under Compound Effects Analysis of Commutation Cold Resistance & Hot Resistance Motor Operation parameters Generator Operation parameters Basic Overhauling Know how....
Product Code: ADM-003-NE - (DC Compound Machines for Electrical Labs)
Equipment for Education, Engineering and Vocational Training - PIC16F877A & 18F452 Embedded Educational Trainer - Single board Universal Embedded Kit based on PIC (Microchip 16F877A / 18F452) Microcontroller for any Embedded applications. Feature 01. CPU: Microchip 16F877A / 18F452 Microcontroller 02. ISP Programming facility Onboard Application 01. 8 LEDs to display Digital Output 02. 8 Switches to give Digital Input each indicated by LED 03. 16*2 Alphanumeric LCD 04. 4 digit Seven segment displays 05. I2C compatible -24C512 EEPROM (64KB) -DS1307 RTC with suitable battery -4 Ch. 8bit ADC & 8 bit DAC using PCF8591 06. Temperature sensor interface Lm35 07. Temperature sensor interface DS18B20 24 I/O Lines Provided on a 26 pin FRC Connector for external interface 08. On board supply +/- 12V, 5V is provided 09. Supply Input Voltage: 230V AC 10. User's Manual with sample programs for all on board features....
Product Code: VLE-003-NE - (PIC16F877A & 18F452 Embedded Educational Trainer for Vocational Training and Didactic Labs)
Air Conditioning Training Equipments....
Product Code: NLAB-0003 - (Air Conditioning Training Equipments for School Science Lab)
Equipment for Education, Engineering and Vocational Training - Advanced Fiber Optic Analogue Transceiver Trainer - Fiber Optic Simplex Analogue Transceiver Trainer has been designed specifically for the study of a typical linear intensity modulation system for analogue signal transmission. Practical experience on this Trainer carries great educative value for Science & Engineering Students. Object: To determine the Numerical Aperature of optical fibre. Losses in Optical Fibres at 660nm and 850nm and other cables. Study of E/O Characteristic of Fibre Optic 660nm and 850nm. Study of O/E Characteristic of Fibre Optic photo transistor. Design and study of a linear Fibre Optic Intensity Modulation system for analog transmission : Gain characteristics of a Fibre Optic Linear Intensity Modulation System. Frequency Response of a Fibre Optic Linear Intensity Modulation System. Waveform distortion in a Fibre Optic Linear Intensity Modulation System. Gain-Band width product of a fibre optic linear intensity Modulation System. Features: The trainer consists of the following built-in parts: IC regulated D.C. power supply. Fibre-Optic Analogue Transmitter @ 660nm Fibre-Optic Analogue Transmitter @ 850nm Fibre-Optic Receiver. One-metre PMMA Fibre patch cord. Five-metre PMMA Fibre patch cord. In-line SMA adaptor. Two potentiometer to vary forward current of LED in Transmitter & current of photo transistor in receiver. SPDT switch for selecting wavelengths 660nm and 850nm. NA JIG with scale marked on it to measure length. Mandrel. NA measuring Scale to measure width of Fibre Optic’s LED. Adequate no of other electronic componets. Mains ON/OFF switch, Fuse and Jewel light. The unit is operative on 230V ±10% at 50Hz A.C. Mains. Adequate no. of patch cords stackable 4mm spring loaded plug length ½ metre. Good Quality, reliable terminal/sockets are provided at appropriate places on panel for connections / observation of waveforms. Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References. Other Apparatus Required AF/RF Generator 10Hz to 1MHz Digital Fibre-Optic Power Meter Digital Multimeter Cathode Ray Oscilloscope 20MHz....
Product Code: FBRO-0003 - (Advanced Fiber Optic Analogue Transceiver Trainer & Kit for Electrical Lab for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Analog to Digital Converter (A to D)....
Product Code: DLTR-0003 - (Analog to Digital Converter (A to D) for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Soldering Station with Japanese Ceramic Heater for Electrical Training Labs Soldering Station with Japanese Ceramic Heater for Electrical Training Labs....
Product Code: SLD-003-NE - (Soldering Station with Japanese Ceramic Heater for Electrical Training Labs for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Universal Motor Speed Control Trainer for Power Electronics Training Labs Universal Motor Speed Control Trainer for Power Electronics Training Labs
.... Product Code: PEC-003-NE - (Universal Motor Speed Control Trainer for Power Electronics Training Labs and Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES PC interface through USB port Software supports Win9x/XP/NT/ME/2000 Can program EPROM, EEPROM & FLASH MEMORY FLASH/EEPROM erased by software commands Supports file formats of Binary & Intel Hex Programming voltage and algorithm selected by software Supply voltage: +9V, 500mA from DC Adapter DEVICE SUPPORT: EPROMs: AMD/MMI, Atmel, Intel, NEC, NS, ST, Holtek, Macronix, SST, Winbond, MTP etc. EEPROM/FLASH: AMD, Atmel, Winbond, Intel, SST, SyncMos, Linkage, Macronix, ST, Dallas, EON, LinkSmart, Mosel_Vitelic, PTC, AST, PMC, AMIC, BenchMarq etc. SERIAL EEPROM: Atmel, ST, AKM, ROHM, ISSI....
Product Code: NPLT-EC003 - (USB Based EPROM Programmer for Vocational Training and Didactic Labs)Heat Pipe Demonstrator, technical teaching equipment for engineering
Our company offers best quality Heat Pipe Demonstrator at the
most competitive market price. These demonstrators are manufactured in
compliance with the industry laid norms and parameters using finest
quality metal. Owing to the corrosion resistance, easy installation,
hassle-free operation and longer functional life, these demonstrators
are extensively demanded around the globe.
Description:
Bathroom Scale 130 Kg Round
.... Product Code: HMEDLAB-SCL-10003 - (Bathroom Scale 130 Kg Round)
