Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Paramecium Enlarged Zoology Model Manufacturer, Supplier and Exporter for Biology Lab
.... Product Code: BZOM-0008 - (Paramecium Enlarged Zoology Model for Biology Lab)Foot Suction MS Base Glass Jar
.... Product Code: HMEDLAB-SUCT-10008 - (Foot Suction MS Base Glass Jar)X-Ray View Box Double Slim Digital with Sensor
.... Product Code: HMEDLAB-XRAY-10008 - (X-Ray View Box Double Slim Digital with Sensor)Differential Voltage Sensor....
Product Code: DataNAS-10008 - (Differential Voltage Sensor)Blood Bag Double (CPDA-1)
.... Product Code: HMEDLAB-BLOD-10008 - (Blood Bag Double (CPDA-1))Electronic Buttocks Injection Simulator
.... Product Code: HMEDLAB-CHRT-10007 - (Electronic Buttocks Injection Simulator)Electronic IV Training Hand
.... Product Code: HMEDLAB-CHRT-10008 - (Electronic IV Training Hand)Safety Goggle with Vent
.... Product Code: HMEDLAB-SAFTY-10008 - (Safety Goggle with Vent)Precise measurement by Spherometer. Self-contained and easy to operate. Young's Modulus Setup - Precise measurement by Spherometer. Self-contained and easy to
operate.
Young`s Modulus Setup is a complete system used to determine Young`s
Modulus of Elasticity of materials. When a metal wire is stretched
beyond its elastic limit then its cross section is reduced i.e. its
structure is changed internally. These changes increase with repeated
drawings. The hardness and elasticity of the material are profoundly
affected. Setup is used to investigate the change in length of a sample
under a varying tension.
Precise measurement by Spherometer.
Self-contained and easy to operate.
Buzzer indicator.
Samples - Aluminium, Brass, and Iron.
A complete setup with stand, weights and different samples....
Astable and Monostable Multivibrator Trainer - Astable and Monostable Multivibrator Trainer - Astable and Monostable
MultivibratorTrainer has been designed specifically for the studyof
Multivibrator in Astable and Monostable Modes using IC NE555. The board
is absolutely self contained with in-built supply and pulse generator.
The Astable Multivibrator, often called a Free-Running Multivibrator, is
frequently used as a simple means of generating square and rectangular
wave signal. It has no stable state. The Monostable Multivibrator, often
called a One-Shot Multivibrator, is useful for generating a single
pulse of desired duration in response to an external trigger.
In-built +5V regulated DC power supply
In-built 1KHz pulse generator for triggering the monostable circuit
Good quality, reliable sockets and test points are provided
Strongly supported by systematic operating instructions
A low cost training solution....
Network Theorems Trainer-II - Designed by considering all the safety standards, On board digital Ammeter, Provided with an extensive manual....
Product Code: EET-TR-08 - (Network Theorems Trainer-II for Electrical Engineering Teaching Labs)Wireless Robotic Arm Training System - 2.4Ghz Wireless Transreceiver. Seven segment display.
....
Colour Pattern Generator – Colour Pattern Generator Colour pattern Generator is designed for
educational and service use. 14 Test patterns normally required for
monochrome & colour TV installations can be easily selected.(New)
generates patterns and multicolour bars. Patterns provide video and RF
modulated signals for alignment. Colour bars are used for colour
settings. Horizontal line, vertical line & circle patterns are used
for Raster, Geometrically and Linearly adjustments. White pattern is
used for white balancing. provides fixed composite video signals which
helps the students for easy analysis
Auto generated composite video signal
Standard & stable colour composite video signal
14 standard patterns : Check pattern,Horizontal bar pattern, Vertical
bar pattern, Horizontal-Vertical Bar pattern, Dot pattern, Circle
pattern, White pattern, Colour Bar pattern, Red colour pattern, Green
colour pattern, Blue colour pattern, Yellow colour pattern, Magenta
colour pattern, Cyan colour pattern one at a time Manual output
selection for band I & III....
Series Inverter - On board triggering circuit. Gradual variation of frequency. Test points to observe output at different points.....
Product Code: PET-TR-08 - (Series Inverter Trainer for Power Electronics Teaching Labs)Sampling & Reconstruction Trainer -
....
ARM 7 Development Board LPC2294 - ARM 7 Development Board LPC2294 Development Board Nvis 5004 is a 32-bit
development platform and serves as a means for code development. This
trainer is designed for students to explore ARM architecture and on
board supporting peripherals which provide an ideal platform for
extensive embedded development. This trainer provides both the serial
and USB connections which can be used to download and run a code on any
standard IDE. This trainer allows users to evaluate, prototype and
create application specific designs.
LPC2294 ( ARM7 TDMI 32 Bit ) MCU clocked at 12MHz
Expansion connectors for plug in modules and prototyping area
On board Flash download utility (programmer) for Philips microcontrollers
Both USB & RS232 interface given for programming
Every pin is marked in order to make the work easier
Master Reset/Restart Key for hardware reset
On board 16 x 2 Alphanumeric LCD Interface
On board UART 0 and UART 1 Interface
On board Switch Interface
On board ADC ( 10 Bit ) Interface
On board 4 x 4 Matrix Keypad Interface
On board I2C Interface
On board facility to connect JTAG debugger
Input/Output & test points provided on board
Self contained trainer with on board DC and AC power supply
CD with sample project code, Programmer software & useful documents
Exhaustive course & reference material
Learning material CD....
Blood Pressure Measurement (Oscillometric) - Provide accurate value of systolic and diastolic pressure. Separate test points to observe the waveform after each block.
....
Temperature Transducers Trainer - Temperature Transducers Trainer - compact and user friendly learning
platforms to provide a modern, portable, comprehensive and practical way
to learn Technology. Each TechBook is provided with detailed Multimedia
learning material which covers basic theory, step by step procedure to
conduct the experiment and other useful information.Temperature
Transducers play a very important role in today`s industrial and
domestic applications. Scientech Temperature Transducers TechBook is
unique in design because it covers study of 4 different Temperature
Transducers. Experiments covering fundamental characteristics of
Transducers & study of Transducer controlled switching / alarm
systems can be performed with this TechBook. 2302 comes with exhaustive
learning material covering theory and experimental procedures for
conducting experiments.
Easy to operate
On Board Digital Voltmeter
On board touch switch
4 different Temperature Transducers
Study of Transducer controlled switching / alarm systems
On board signal conditioning circuitry
Built-in DC Power Supply
Functional blocks indicated on-board Mimics
Exhaustive Learning Material....
Digital Colony Counter - It is designed for quick and accurate counting of bacterial and mould colonies in petri dishes. Feature packed & easy to use, this is an indispensable bench top tool for the busy microbiologist. It is designed for rapid and accurate counting of bacterial and mould colonies. Simply place the petri dish on the illuminated pad and touch the dish with the pen provided to mark each colony in turn. This causes a count to be registered on the digital display and an audible tone confirms each count made. Marking the dish with the pen avoids missing colonies or double counting. The digital count on the display cab be reset manually any time by pressing the RESET key. Optimum viewing of colonies is aided by peripheral glare-free illumination. An integral magnifying glass provides for easier counting of small colonies. FEATURES : 110 mm Dia Magnifying Glass Audible Confirmation of each Count Uniform Glare Free Illumination Digital Readout Pen Auto Marker Pen....
Product Code: NAAY-M8 - (Digital Colony Counter)Air Entrainment Meter for Aggregate Testing - Entrainment of a small amount of air in the cement concrete has been found to improve considerably the durability of concrete. Further, when use of admixtures is made to increase workability of concrete, a check of the air content is required to ensure that the percentage of air remains between 1 to 2% to get the optimum performance of the concrete structure. Air Entrainment Meter is having a capacity of 0.005 m3 (5 Liters), suitable for aggregate size upto 38mm. Each air entrainment meter is supplied complete with a calibrating cylinder, pressure gauge, funnel, measuring jug, straight edge and a hand pump.....
Product Code: NATM-M8 - (Air Entrainment Meter For Testing Lab for Aggregate Testing Lab)Hardness Tester for Mastic Asphalt for Bitumen Testing - For determining the hardness number of Mastic Asphalt for flooring. It consist of an internally insulated cabinet to the base of which is fitted a water bath having two taps. The bath is heated by an immersion heater and the temperature is controlled with the thermostat at 35� +/- 0.5� C. A 6.5mm dia pin is loaded on the specimen by means of a lever to give a 31.7 Kg weight. A dial gauge 0.01 x 25 mm is provided to record the penetration of pin into the specimen.....
Product Code: NBTE-M8 - (Hardness Tester for Mastic Asphalt For Testing Lab for Bitumen Testing Lab)Brazilian Test Apparatus for Rock Lab Testing - The instrument is useful for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. A pressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field also. Optional Extras : Pair of jaws for samples dia (a) 60mm (b) 70mm (c) 80mm (d) 90mm (e) 100mm.....
Product Code: ROKQ-08 - (Brazilian Test Apparatus For Testing Lab for Rock Testing Lab)for Oil, Petroleum & Paint Testing - Flow Cup no.4 with NPL calibration certificate. Flow Cup no.4 without NPL calibration certificate. - Simple flow cup of the efflux type is used for approximate measurements of apparent viscosity for control of consistency during manufacture and use of paints, lacquers and viscous products. Flow cups with protective skirt are made from gun metal with stainless steel orifice and are equivalent to Type B cups. Each cup is supplied with a stand having leveling screws.....
Product Code: NPPT-M8 - (Flow Cup For Testing Lab for Oil, Petroleum & Paint Testing Lab)for Soil Testing - This is for the determination of the sub sieve particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantity the proportions by weight of the various sizes of particles present in the soil. It is recommended as a standard procedure to use dispersion agent to avoid flocculation. The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically. A sedimentation tube is held by a laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in mm at the side of the sliding panel. Supplied complete with Anderson pipette 10ml. At the side capacity made from glass, and a sedimentation tube also of glass of 500ml capacity and 50nos. Test form pads. ACCESSORIES & SPARES : 1) Sedimentation Pipette (Anderson pipette) 25ml. 2) Sedimentation tube 100ml 3) Sedimentation pipette 10ml 4) Sedimentation tube 500ml 5) Test forms pad of 50....
Product Code: NSOL-T8 - (Grain Size Analysis Pipette Met For Testing Labhod for Soil Testing Lab)Cone Penetrometer for Mortar for Concrete Testing - For determining the consistency of masonry mortar Consists of a movable bearing rod to which a cone 145mm. Long and 75mm dia at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A dial graduated in mm with rack and pinion is provided for measuring the penetration. Complete with a conical container 150mm id x 180mm deep and a platform.....
Product Code: NCOT-C8 - (Cone Penetrometer for Mortar For Testing Lab for Concrete Testing Lab)Flow Table for Cement Testing - determining the flow of cement concrete. Consists of a steel table top 76.2cm (30 inch. Dia) Finely machined. The integral cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of study construction. Holes for mounting in foundations are drilled in the base plate. The ground and hardened steel cam is designed to fit and drop the table by 12.5mm. The hand wheel makes it simple to operate the table. Supplied with one conical mould with two handles, 12cm height, having17cm. Inside Dia. at the top and 25cm inner dia. at the base. Complete with a tamping rod 16mm dia x 600mm long one end rounded.....
Product Code: NCMT-E8 - (Flow Table: for determining the flow of cement concrete For Testing Lab for Cement Testing Lab)PROFOSCOPE Rebar Detection System....
Product Code: NDTE-C8 - (PROFOSCOPE Rebar Detection System For Testing Lab)Power Supply for Electronics Lab - DC Power Supplies are unique since they provide the facility to preset both voltage and current limit desired by the user before DC output is turned on. This avoids damaging the circuit under test. Each variable output has \"DC ON\" switch and operates in the CV or CC mode. The output is ultra clean with low noise and ripple due to linear regulation technique. All the outputs are protected from short circuits and overheating. These Power Supplies are convection cooled. These attractive compact & feature rich DC Power Supplies not only require minimum bench space. It ensures ruggedness by providing sturdy powder coated metal enclosures. Output range single/dual variable 0-30 V/2A. Facility to preset both voltage and current limit desired by the user before DC output is turned on CV/CC indicted by LED\'s Automatic overload and short circuit protection. Two output meters to read Voltage and Current.....
Product Code: POW-TR-01 - (Power Supply for Electronics Lab for Digital Analog Teaching Labs)Based on 8086/8088 CPU operating at 2.5/5MHz 16KB of RAM with Battery Backup, 16K Monitor EPROM Peripheral like 3x 8255, 8253, 8259, 8251 RS-232 interface 20x2 Alphanumeric LCD Display with Back lite with 101 ASCII Keyboard In-Built Power Supply of +5V/1.5A, ±12V/250mA....
Product Code: 02-8086-8088 - (ADV-Microprocessor Trainer for Microprocessor Teaching Labs)Four Probe Experiment for Physics Lab for High School Science Kits Lab....
Product Code: HS-LAB0008 - (Four Probe Experiment for Physics Lab for High School Science Kits Lab)3 Phase Wound Rotor Slipring Motor for Electrical Lab for Electric Motors Teaching Labs - This Model is an Educational model suitable for demonstrating to students the complete know of the Basics, Components, Starting methods, Speed-Torque behavior, Wear & Tear & Maintenance of these motors packaged in small rating. Students can make connections of their own with the help of the terminations provided for study of features viz Starting methods, Speed control, Speed-Torque, Effect of resistance in rotor, Effects of Single phasing, Effect of voltage imbalance operation, Blocked rotor test. Technical Specs : Power ratings available : 350W / 750W / 1KW /2 KW / 3KW/ 5KW Voltage Input: 440V AC 50hz RPM: 1440 / 2880 RPM Single / Double shaft extension, TEFC, IP44, IC01, B3, Class-B, S1, Casting body List of Experiments Starting by DOL Starter Starting by reduced voltage starter. Speed variation by Rotor resistance Speed Control by VVVF method Load test & No load test of machine Speed-Torque Analysis Voltage-Speed Analysis Speed reversal Efficiency Analysis Blocked rotor test Cold Resistance & Hot Resistance Motor Operation parameters Basic Overhauling Know how....
Product Code: ADM-008-NE - (3 Phase Wound Rotor Slipring Motor for Electrical Lab)Equipment for Education, Engineering and Vocational Training - Oscilloscope Trainer & Oscilloscope Lab Kit for Training - Oscilloscope Demonstrator Trainer is specifically designed for the study of working of an oscilloscope in an open form. The Controls are placed actually at the place as they are in the layout schematic. Thus a trainee can easily locate any section, & components in the section and study it thoroughly. The function controls and the adjustment controls are fully accessible to the trainee to verify their effect on the working of the scope. Creation of Faults and rectification of faults are important exercise covered in the experiments. An illustrated Block and Circuit Schematic and the adjustment plan right in front of the trainee's eyes helps him tocorrelate each operation during the demonstration. Oscilloscope in open form with all components and controls placed on single PCB Amplifier, Time base, Channel section signal available on test points Separate sections for PS, EHT, VA, HA, TB & Trigger for easy identification Fault creation & rectification provided Track printing with different colours on different sections on component board for easy circuit training Legend Printing on PCB for easy identification of components Can be used as a standard 20 MHz Dual Trace Oscilloscope Technical Specifications Operating Modes Channel I, Channel II, Channel I & II Alternate or chopped, Controls provided on PCB. Channel selection signals available at Test points. X-Y operation 1:1 Vertical deflection (Y): (Identical channels) Bandwidth : DC-20 MHz (-3 dB) Risetime : 17.5 ns (approx.) Deflection coefficients : 12 calibrated steps 5 mV / cm - 20 V / cm (1-2-5 sequence) Accuracy : ±3 % Input Impedance : 1 MW II 30 pF Input coupling : DC - AC - GND Maximum Input voltage : 350 V (DC + Peak AC) Pre-Amp, Final Amp Outputs at Test Points. Timebase: Time coefficients : 18 calibrated steps, 0.5 ìs / cm - 0.2 s / cm (1-2-5 sequence) with magnifier x 5 to 100 ns / cm, with variable control to 40 ns / cm Accuracy : ± 3 % (in Cal position) TB generation at Test Points Sweep Output : 5 V (approx.) Trigger System: Modes : Automatic or Variable Source : CH I, CH II, External Slope : Positive or Negative Coupling : AC, TV Frame Sensitivity : Int 5 mm, Ext 1 V (approx.) Trigger Bandwidth : 30 Mhz Horizontal Deflection (X) Bandwidth : DC - 2 MHz (-3 dB) X - Y mode : Phase Shift < 5° at 50 KHz Deflection coefficients : 12 calibrated steps 5 mV / cm - 20 V / cm (1-2-5 sequence) Input Impedance : 1 MW II 30 pF Component Tester : Test Voltage : Max 8.6 V (Open) rms Test Current : Max 8 mA (Shorted) rms Test Frequency : 50 Hz, Test circuit grounded to chassis General Information Cathode Ray Tube : 140 mm Rectangular medium short persistence (P31) Accelerating potential : 1.9 KV (approx.) Display : 8 ×10 cm Calibrator : Square Wave generator 1 KHz (approx.), 0.2 V ±1% for probe compensation Z Modulation : TTL level Stabilized Power Supply : All operating voltages including the EHT Power Supply : 220 V ±10 %, 50 Hz / 60 Hz on request Power Consumption : 40 VA(approx.) Weight : 7.3 Kg (approx.) Dimensions (mm) : W 450 × D 420 × H 145 Operating Temp. : 0-40°, 95 % RH Finish : Off white with side handle Fault Simulation : Total 15 Faults included Included Accessories : DMM 1 No., Manual 1 No., Student manual 1 No., BNC-BNC Cable 1 No., BNC - Probe tip Cable 1 No., Test Prods 1 pair,. Additional Jumpers 10 Optional Accessories : Switchable Probe X 1 - X 10....
Product Code: CON-008-NE - (Oscilloscope Trainer & Oscilloscope Lab Kit for Training for Vocational Training and Didactic Labs)Metric micrometer with approx. range is: (0-25)mm and (0.01) mm as accuracy.....
Product Code: MEAS1008 - (Micrometer)Equipment for Education, Engineering and Vocational Training - Physics of Fiber Optics Trainer - PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit. List of Experiments: Light traveling around corners in an Optical Fiber Coloured light traveling down an Optical Fiber Photo detector detecting light LED output as a function of a current LED shining light into Transmission of light between two fibers Transmission through a gap between fibers Fiber Optic transmission sensor Fiber Optic reflection sensor Measuring Losses in the fiber Measurement of propagation loss in the Fiber Measurement of connector loss Fiber bending loss Measurement of Numerical Aperture of Optical Fiber Setting up of Fiber Optic Analog Link Setting up of Fiber Optic Digital Link Setting of Fiber Optic Voice Link. Switch Faults Study Effect of switch fault 1 in function generator section Effect of switch fault 2 in audio pre amplifier section Effect of switch fault 3 in signal strength section 15.4 Effect of switch fault 4 in audio amplifier section Features: On-board Function Generator. Transmitter : 1 No. Receiver : 2 Nos Fiber Optic Analog Link. Fiber Optic Digital Link. Signal strength indicator. Technical Specifications: Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible. Receiver : 2 Nos. silicon photo detectors Modulation : Intensity modulation. Driver Circuit : Analog and digital configuration for 635 nm LED Analog Bandwidth : 35KHz. Digital Bandwidth : 50KHz. On-Board Function Generator : Sine Wave &TTL Square Wave : Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz Amplitude : 0 to 4Vpp. (Except Square) Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power. Fiber Optic Cable : Type : 1000 micron Step Index, Multimode Plastic Fiber Fiber Lengths : 1&5 Meter. Power Supply : GND, +5V, +12V, -12V at100mAINT. Accessories: Red Short Links : 10 Nos. Crocodile Links : 02 Nos. Plastic Fiber 1 Meter (with connector) : 01 No. Plastic Fiber 5 Meter (with connector) : 01 No. N.A. Jig&N.AScale : 01 No. Each Connection Sleeves (Splicing unit) : 01 No. Microphone : 01 No. Speaker : 01 No. Experimental Manual : 01 No. Mandrel : 01 No. Other Apparatus Required: Cathode Ray Oscilloscope20MHz....
Product Code: FBRO-0008 - (Physics of Fiber Optics Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Study of Various Types of Flip - Flops....
Product Code: DLTR-0008 - (Study of Various Types of Flip - Flops for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - SMD Rework Station for Electrical Training Labs SMD Rework Station for Electrical Training Labs....
Product Code: SLD-008-NE - (SMD Rework Station for Electrical Training Labs for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - SCR Converters and Reactive Loads Trainer for Power Electronics Training Labs SCR Converters and Reactive Loads Trainer for Power Electronics Training Labs....
Product Code: PEC-008-NE - (SCR Converters and Reactive Loads Trainer for Power Electronics Training Labs for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES PC interface through Serial (RS-232) port (USB Version also available) Support Microchip PIC devices....
Product Code: NPLT-EC008 - (Handy PIC Programmer for Vocational Training and Didactic Labs)Heat Transfer in Forced Convection, technical teaching equipment for engineering
Our company offers best quality Heat Transfer in Forced Convection
at an affordable market price. The apparatus offered by us is utilized
for measuring average surface heat transfer coefficient or the Reynolds
number for a pipe losing heat under forced convection conditions.
Manufactured under strict supervision in accordance with industry set
norms and parameters, this apparatus is appreciated by the clients for
compact design, seamless finishing and longer functional life.
Description:
Hydraulic Ram Test Rig, technical teaching equipment for engineering
Owing to our expertise and the assistance of dedicated workforce, we have been able to offer optimum quality Hydraulic Ram Test Rig
at an affordable market price. These products are precisely
manufactured under strict supervision using best quality metal. Known
for unmatched quality, high efficiency and hassle-free operations, these
products are highly demanded among the industrial clients.
Description:
Technical Specifications:
Convertor Plug 2 Pin
.... Product Code: HMEDLAB-GENRL-10008 - (Convertor Plug 2 Pin)Metacentric apparatus for engineering schools....
Product Code: Fluid Mechanics008 - (Metacentric apparatus for engineering schools)PIPE FRICTION APPARATUS for engineering schools....
Product Code: MCH008 - (PIPE FRICTION APPARATUS for engineering schools)Stencil 2570....
Product Code: MATHSKITS008 - (Geometric Stencil for Maths Lab)Gear Sets Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG008 - (Gear Sets Engineering Training Model for engineering schools)Electronic Ignition System of an Automobile Engineering Model and Training System, technical teaching equipment for engineering....
Product Code: NEAUTOM08 - (Electronic Ignition System of an Automobile Engineering Model and Training System for engineering schools)