Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Power steering system (Hydraulics) set....
Product Code: NSL0030 - (Power steering system (Hydraulics) set)4-Amino Acetophenone....
Product Code: NECHEMICAL-L5009020 - (4-Amino Acetophenone)Bismuth Tritartrate....
Product Code: NECHEMICAL-L6006020 - (Bismuth Tritartrate)Potassium Periodate....
Product Code: NECHEMICAL-L6024020 - (Potassium Periodate)Ferrous Oxalate Dihydrate....
Product Code: NECHEMICAL-L6015020 - (Ferrous Oxalate Dihydrate)Ammonium Hydrogen Carbonate....
Product Code: NECHEMICAL-L6002020 - (Ammonium Hydrogen Carbonate)Naphazoline Hydrochloride....
Product Code: NECHEMICAL-L5004020 - (Naphazoline Hydrochloride)Cesium (Cs) 10,000 ppm....
Product Code: NECHEMICAL-L400020 - (Cesium (Cs) 10,000 ppm)Lactic Acid 0.1 N Solution....
Product Code: NECHEMICAL-L3003020 - (Lactic Acid 0.1 N Solution)Borax Carmine Aqueous Solution....
Product Code: NECHEMICAL-L3002020 - (Borax Carmine Aqueous Solution)Pelargonic Acid AR (Nonanoic Acid)
....
P-10 Gas for XRF analysis India....
Product Code: NG415A - (P-10 Gas for XRF analysis India)DC Motor Assembly to Obtain DC Series, Shunt and Compound Motor
.... Product Code: ES915 - (DC Motor Assembly to Obtain DC Series, Shunt and Compound Motor)Pathology Urine Analyzer
.... Product Code: HMEDLAB-PAT-1010020 - (Pathology Urine Analyzer)Duster Wiper for Blackboard
.... Product Code: SCHOOLKITLAB0020 - (Duster Wiper for Blackboard)AWD Periphery Kit Renewable
.... Product Code: HMEDLAB-MKT-10020 - (AWD Periphery Kit Renewable)ASCARIS MALE AND FEMALE Manufacturer, Supplier and Exporter for Biology Lab
.... Product Code: BZOM-0021 - (ASCARIS MALE AND FEMALE for Biology Lab)Anemometer Demonstration - This anemometer is useful in determining wind speed. Made of corrosive-resistant materials for prolonged outdoor use. One cup is coloured different for ease in determining the number of rotations.....
Product Code: GEOM-0021 - (Anemometer Demonstration for Earth Science Lab)Resolving Power of Telescope - Sodium Lamp as Monochromatic Light Source. Equidistant stripes. Resolving Power of Telescope Training System- N Sodium Lamp as
Monochromatic Light Source.
Equidistant stripes.
Resolving Power of Telescope NV6042 helps students to understand the
fundamental principle of Telescope. Telescope used to gather and focus
light. A Telescope with better resolving power will reveal smaller
surface features on the surface of the Moon or a planet. If a Telescope
has good resolving power, then magnifying the image can be seen with
fine details. Resolving Power of Telescope is the ability to see really
small details so objects that are close together in the sky are easily
seen as separate. The resolving power of a Telescope is indirectly
related to the diameter of the main mirror or lens. However it is
limited by the Earth`s atmosphere. Large Telescopes do not have better
resolving power than modest size Telescopes.
Sodium Lamp as Monochromatic Light Source.
Equidistant stripes.
Provided with variable rectangular slit.
Crosswire- Eyepiece.
Wide aperture optics.
Rack and pinion arrangement focusing
Durable and precise construction.
e-manual.....
DC Series Motor Lab - Stand alone operation, Exclusive and attractive designed panel, High quality meters.....
Product Code: EET-TR-21 - (DC Series Trainer Motor Lab for Electrical Engineering Teaching Labs)Step Down Chopper - Test points provided to check the outputs at different blocks. DC motor 24V 500mA with 100 RPM as Load. On board firing circuit.....
Product Code: PET-TR-21 - (Step Down Chopper Trainer for Power Electronics Teaching Labs)I2C ADC/DAC Module - i2C ADC / DAC Module I2C protocol based ADC/DAC module enables students
and practicing engineers to gain practical experience of applications
of Microcontroller. The object is to understand how two wire serial
interface device is used for interfacing with Microcontroller to
communicate with external applications. Analog inputs are converted into
digital through Microcontrollers and vice versa. ADC/DAC module, has
input and output terminals for connection of external real world
applications.
PC based programming
Expansion connectors for plug in with Microcontroller unit and prototyping area
Every pin is marked in order to make work easier
Input/Output & test points provided on board
ADC
I2 C compatible serial interface, 400 kHz I C fast mode
Single-ended analog input channel
On-chip sample and hold
On-chip conversion clock
Single supply operation
DAC
Simple I2C Serial interface
Single supply operation
Low Power : 350mA operation, 0.5mA shutdown
Exhaustive Learning Material....
8 Bit Variable Data Generator -
....
Traffic Light Control PLC Application Modules - Traffic Light Control PLC Application Modules - Traffic light control
enables students and practicing engineers to gain invaluable practical
experience of the principles and application of programmable logic
controllers. The object is to connect and program an external
programmable logic controller to monitor and control the traffic light
system. Traffic light controlling is shown with the help of LEDs. The
apparatus is connected with output of PLC. Four way traffic is
automatically controlled by PLC roads which meeting at a circle
User friendly and powerful instruction sets.
Ready to use application board.
Exhaustive learning material....
SCR Characteristics Trainer -
SCR Characteristics Trainer is a platform where Students can understand the various thyristor firing technique by using IC 555 and UJT. This is very useful for understanding of pulse generation. SCR Characteristics Trainer is provided with in built power supplies, sockets for making interconnection in the circuit and exhaustive learning material.
pH, Conductivity, TDS, Salt, Temperature Waterproof Tester - t is microprocessor based waterproof TDS/Temp. Tester. It is used to determine pH, mV, Temperature, Conductivity, TDS and salts in a liquid. This tester has wide applications in agriculture, anti-freeze recycling, aquarium, boiler, chemical industry, cooling tower, drinking water, fish farming, food industry, garden husbandry, hydroponic, laboratory usage, plating industry, swimming pool & spa, water treatment, etc. It has rugged design for field use. It floats on water. It has automatic temperature compensation (ATC) and is oC / oF switchable. It displays Maximum / Minimum value and data hold on large LCD display. It has low battery and consumption indicator alongwith autoshut off after 10 minutes of non use. FEATURES : Microprocessor based IP-57 Water proofing Floats on water Large LCD display Automatic temperature compensation (ATC) Data hold, Max/Min and oC / oF switchable Low battery and consumption indicator Auto power-off after 10 minutes Replaceable sensor....
Product Code: NAAY-M21 - (pH, Conductivity, TDS, Salt, Temprature Waterproof Tester)Specific Gravity & Water Absorption of Aggregates for Aggregate Testing - This Set Is Used For Specific Gravity, Apparatus Specific Gravity And Water Absorption Of Aggregates. Specification : The outfit comprises of 1. Electronic balance, capacity 5 kg. Least Count 0.1gm, provision is made in this balance to suspend density basket under material pan. This balance is mounted on an angle iron frame stand. 2. Density basket. 3. Air tight container to suspend density basket. 4. GI Tray of area not less than 650 cm sq. 5. Absorbent cloths 75cm x 45cm.....
Product Code: NATM-M21 - (Specific Gravity & Water Absorption of Aggregates For Testing Lab for Aggregate Testing Lab)Loss on Heating(Thin Film Oven) for Bitumen Testing - This dual purpose oven is designed to determine the loss in weight of bitumen and flux oils (Loss on Heating test) and the effect of heat and air on asphaltic materials (Thin Film test). The unit is heavily insulated and has a double glass door for viewing the test chamber thermometer and samples. Temperature is controlled at 163� C � 1� C by means of a variable temperature controller and thermostat. Two rotating platforms are supplied with each oven: One accepts 9 standard penetration cups for the loss on heating test, the other accepts two 140mm diameter test pans for the thin film test. The platforms are rotated at 5 to 6 rpm by an external motor. Chamber dimensions 350 x 350 x 350mm (length x width x height) - Series Loss on Heating / Thin Film Oven Operating Voltage 230 V A.C. Single Phase - Aluminium Test Pan 140mm diameter x 9.5mm deep.....
Product Code: NBTE-M21 - (Loss on Heating (Thin Film Oven) For Testing Lab for Bitumen Testing Lab)for Soil Testing - The instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. Long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. The small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. Needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq Cm. And one tommy pin is supplied. Complete as above in a wooden carrying case.....
Product Code: NSOL-T21 - (Proctor Needles (Spring Type) For Testing Lab for Soil Testing Lab)Melting Pot for Concrete Testing - Used to melt Capping compound this pot comprises a metal container in a well lagged steel jacket. A thermostatic control and stand by heat switch are fitted. Supplied complete with lift off cover. Warmer : An electrically heated and thermostatically controlled bath for melting the capping compound. Supplied with cover and handle. Suitable for operation on 230 Volts A.C. Single Phase. Capping Compound : Used for capping the ends of concrete cylinders to be tested. Available in packs of 5 kg. Bowl & Ladle : Metallic bowl is used to carry the capping compound and ladle is used to pout molten capping compound in to the groves between specimen and capping plate. Supplied as a set. Dimensions (Diameter x Depth) Internal: 140 x 150mm External: 250 x 165mm Capacity: 2.4 Litres Rated Power: 750 W Temprature: 40 to 3400C....
Product Code: NCOT-C21 - (Melting Pot For Testing Lab for Concrete Testing Lab)Laboratory Cement Autoclave for Cement Testing - he autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature. Note : Ordinary laboratory cement autoclave with mild steel chambers are also available.....
Product Code: NCMT-E21 - (Laboratory Cement Autoclave For Testing Lab for Cement Testing Lab)Inductive Load Bank for Electrical Lab for Electric Motors Teaching Labs - This Model is an educational model suitable for demonstrating to students the complete know of the Basics, Loading provided in steps, Study of Efficiency & Maintenance of these Loads packaged in small rating. Students can make connections of their own with the help of the terminations provided. Technical Specs : Power ratings available : 1KW / 2KW / 5 KW / 10KW Voltage Primary : 440V AC 3Phase/ 220V AC Single phase /220V DC Enclosed in cabinet with Steps provided for loading, meters provided for each phase & terminations brought out on Banana terminals List Of Experiments: Calculation of total resistance Change of resistance on load Efficiency evaluation Study of losses Basic Overhauling Know how....
Product Code: ADM-021-NE - (Inductive Load Bank for Electrical Lab)Equipment for Education, Engineering and Vocational Training - SMD Technology Trainer & Lab Kit - Surface Mount Technology (SMT) is method for constructing electronic circuits in which the components are mounted directly onto the surface of printed circuit boards (PCBs). Electronics devices so made are called Surface Mount Devices or MSDs. An SMD component is usually smaller then its leaded counterpart because it has no leads or smaller leads. It may have short pins or leads of various styles, flat contacts, a matrix of balls (BGAs), or terminations on the body of the component (passives), unlike discrete components, SMD components have a huge vareity of packages (size). SMD Technology will be the order of the day for the electronics industry in the coming years. SMD offers Small size, consequent High Packing Density, High Reliability & Improved High Frequency performance. SMD Technology Kit to keep you in pace with the technology revolution. The user is familiarized from components their packages to soldering practice.SMD Technology Kit Contains: SMD Identification Board The user is familiarized with different SMD Components -Resistors, Capacitors, Inductors, Diodes, Transistors & IC’s packages. Proto BOARDS Proto BOARDS are special PCB’s with readymade solder pads for various SMD components & IC’s, which makes the soldering much easy. It includes Through Hole, SO, SOP, Chip Scale package Proto BOARDS. SMD Soldering Jig SMD Soldering Iron AVariable Temperature Controlled Soldering Iron is supplied with lead. SMD components SMD components are supplied for Solder practice. Resistors , Capacitors, Diodes , Transistors Tweezers: Holding & placing of SMD components. List of Accessories : 1. SMD Identification Board with manual 1 no. 2. Proto BOARDS 2 nos each - Discrete Surface Mount -SOP -SO -Through Holes -Chip Scale SMD Soldering Jig 1 no. SMD Soldering Iron 1 no. SMD components Resistors , Capacitors, Diodes , Transistors 10 no. each Tweezers 2 no. Manual 1 no.....
Product Code: CON-021-NE - (SMD Technology Trainer & Lab Kit for Vocational Training and Didactic Labs)Automatic Level Instrument....
Product Code: NLAB-0021 - (Automatic Level Instrument for School Science Lab)Equipment for Education, Engineering and Vocational Training - Single Phase Half Controlled Symmetrical & Asymmetrical Converter for Power Electronics Training Labs Single Phase Half Controlled Symmetrical & Asymmetrical Converter for Power Electronics Training Labs....
Product Code: PEC-021-NE - (Single Phase Half Controlled Symmetrical & Asymmetrical Converter for Power Electronics Training Labs for Vocational Training and Didactic Labs)Klystron Microwave Test Bench - The Microwave Test Benches are precision made microwave systems, which use standard type rectangular wave-guide components to illustrate the essential elements of this field for study. The equipment consist of : A selection of wave-guide components The power supply for the microwave source A detector A meter, which monitors the detector output Wall Chart Microwave Components Chart These Training Benches are completely self-contained & provide the means to allow students to carry out practical work at extremely low cost. A comprehensive manual containing extensive microwave theory and a progressive series of assignments is supplied with the Trainer.....
Product Code: MICRO-BH001 - (Klystron Microwave Test Bench for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Supports 73,295+ IC devices from 272 manufacturers and continuing. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds. Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins. The programmer operates in either PC hosted mode or stand-alone mode. Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip. Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad. A CF (compact flash) card stores the project files. In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability. Over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows Vista and Windows XP x32/x64 Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip inser tion in Production Mode. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. Log file provides production quality tracking. CE and ROHS Compliant DEVICE UPDATES: XELTEK updates software and device algorithm regularly. View the latest Device List. Download the current software version free of charge at Download Center. XELTEK also adds devices upon customer’s request at its option. VOLUME PRODUCTION SOLUTIONS: By operating multiple programmers simultaneously, you can use them in a high volume production environment. Cluster the programmers for flexible and easy volume production. Optional Compact Flash card is necessary to store user data, and device algorithm in stand-alone operation. For most operations, XELTEK recommends the 256MB size. Click here for more information about Volume Production Solution HARDWARE & ELECTRICAL SPECIFICATIONS: Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP PC interface: USB2.0 (High speed) Stand-alone memory: Compact FLASH Card Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A ITEMS INCLUDED: SuperPro 5000 Programmer with a DIP48 Adapter AC adapter Software CD USB2.0 Cable User's Manual Registration Card OPTIONAL ACCESSORIES: Adapter in various packages CF card for stand-alone operation Go to Previous message | Go to Next message | Back to Messages | Full Headers Reply Reply All Forward Forward Mail Search WelcomeInboxNewFoldersMail Options Copyright © 1994-2012 Yahoo! Inc. All rights reserved. Terms of Service - Copyright/IP Policy - Guidelines NOTICE: We collect personal information on this site. To learn mor....
Product Code: NPLT-EC021 - (USB Interfaced Ultra-Fast 144 Pin Standalone Universal Programmer for Vocational Training and Didactic Labs)Number balance....
Product Code: MATHSKITS0021 - (Number balance for Maths Lab)