Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Power Measurement by Two Wattmeter Method - Exclusive and rugged designed panel, Designed by considering all the safety precautions, Stand alone operation....
Product Code: EET-TR-12 - (Power Measurement Trainer by Two Wattmeter Method for Electrical Engineering Teaching Labs)
DSO Applications Demonstration Trainer – DSO Applications Demonstration Trainer DSO application trainer is a
compact ready to use experiment board contains some applications of the
Digital signal Oscilloscope. This board is very useful for the students
to understand the basic features of the DSO using small applications.
Board is provided with the built in power supplies & rotary switch
for application.
Single shot : Switching transient of a push to on switch is demonstrated
Slow Motion: Charging and discharging of an electrolytic capacitor
Medical : ECG Simulated wave with pulse rate adjustment
Low repetition rate : Sine wave generator of low frequency
Mechanical : Relay bouncing and turn ON time
Audio : MIC Testing with variable gain audio amplifier....
Power Electronics Lab - Self contained & easy to operate.
Functional blocks indicated on board mimic. Solder less breadboard.....
Delta, Adaptive Delta and Delta Sigma Modulation/ Demodulation Trainer -
....
Arrhythmia Monitor - Provides information about 22 abnormal (Diseased) waves which indicates particular abnormality in heart. Every Systolic action of heart is indicated by LED (visible)and audible (Buzzer) sound controls.....
Product Code: BMO-TR-12 - (Arrhythmia Monitor Trainer for Bio Medical Teaching Labs)
Computer interface Module - Computer interface Module Computer Interface module is an extension
module for Nvis Microcontroller development platforms. The module has
been designed to have a clear understanding of how serial port and USB
port interfaced devices are controlled and interfaced with
Microcontroller. The MC03 is connected with Microcontroller unit and PC.
The computer interface module is made in such a way that a student can
understand the whole concepts of serial and USB port and also how they
are interfaced with Microcontroller
RS 232 interface using Rx / Tx of MCU for uploading /downloading
FT232 interface & communicate with MCU serial to USB with computer
PC based programming
Expansion connectors for plug in with Microcontroller unit and prototyping area
Every pin is marked in order to make the learning easier
Input/output & test points provided on board
Exhaustive Learning Material....
Potentiometric Error Detector Trainer - Potentiometric Error Detector Trainer - ITT-TR-12 with angular/linear
position control system. Which is to provide an output angular position
signal which precisely follows the input angular position signal. DC/AC
POTENTIOMETRIC ERROR DETECTOR Scientech 2306 provides in-depth study of
closed loop & open loop position control system. All the feedback
control systems operate from the error signal which is generated by a
comparison of the reference and the output. Error detectors perform the
crucial task of comparing the reference and output signals. If the
inputs and outputs are already in the form of electrical voltages then
the error detector is a simple comparator. But in position control
system the inputs and outputs are in the form of angular/linear
displacement hence these displacement are converted into the analogous
electrical voltage by means of potentiometer (3600 SHAFT ROTATION SERVO
POT).
DC/AC both operations
High quality 360 shaft rotation servo potentiometer
AC excitation at 800Hz approx (inbuilt Wien bridge oscillator)
Built in balanced demodulator circuit
3.5 digits DVM for carrying measurements
Separate test-points to observe waveforms after each block
Phase reversal of error in AC operation
Closed loop position control system
Self contained and easy to operate....
Kirchhoff`s Current and Voltage Law Trainer - Kirchhoff`s Current and Voltage Law Trainer -Current and Voltage Law
Trainer is a compact, ready to use experiment board. It is useful for
students to study and understand the basic concept behind Kirchhoff`s
Current Law and Kirchhoff`s Voltage Law. It can be used as a stand alone
unit with its inbuilt DC power supply and DC Ammeter.
Stand alone unit, requires no extra accessories
Exclusive and compact design
In-built DC power supply
In-built DC Ammeter
Diagrammatic representation for the ease of connections
e-Manual....
Auto KARL FISCHER Titrimeter - It is an automatic apparatus designed to carry out KARL FISCHER Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e. CONTROL UNIT & TITRATION UNIT. The CONTROL UNIT controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology. Titration unit contains the magnestic stirring mechanism and the solenoid value assembly. The cabinet is designed to serve as a strudy titration stand. Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper & textile industries, petroleum refineries, chemical and fertilizer units. FEATURES : Auto titration control Separate control & titration units Auto zero burette Adjustable Timer Visual & Audible alarm....
Product Code: NAAY-M12 - (Auto Karl Fischer Titrimeter)
Sand Absorption Cone And Tamper (NATM-M12) for Aggregate Testing - for engineering- Consists of a conical metal mould and a metal tamping rod having circular tamping face 25 mm dia....
Product Code: NATM-M12 - (Sand Absorption Cone And Tamper For Testing Lab for Aggregate Testing Lab)
Say bolt Viscometer, Electrically Heated, ASTM D88, D244, AASHTO T72 for Bitumen Testing - for the empirical measurement of Say bolt Viscosity of petroleum products at specified temperatures between 70o F and 210o F. This is also used for determining the Saybolt Furol Viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450 F. It comprises one each of cylindrical Oil cup, Universal Tip, Furol Tip, Bath Fitted with immersion Heater mounted on a stand. Dimmer stat for temperature control, Stirrer with shield. Complete with insulated handle and thermometer support receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level. Suitable for operation on 230 V 50 Hz, Single Phase, A.C. Optional Extras : - Brass Oil Tube - Receiving Flask, 60ml - Universal and Furol Tip (Set of 2) - Filter Funnel - Thermometer Support - Heating Coil - Thermometer Type 18 F Range : 66o F to 80o F - Thermometer Type 19 F Range: 94o F to 80o F - Thermometer Type 19 F Range: 120o F to 148o F - Thermometer Type 20F Range: 134o F to 148o F - Thermometer Type 21 F Range : 174o F to 188o F - Thermometer Type 22 F Range : 204o F to 218o F - Thermometer Type 77F Range: 245o F to 265o F - Thermometer Type 77F Range: 295o F to 315o F - Thermometer Type 78 F Range: 345o F to 365o F - Thermometer Type 80F Range : 395o F to 415o F - Thermometer Type 81F Range: 445o F to 465o F....
Product Code: NBTE-M12 - (SAY Bolt Viscometer For Testing Lab for Bitumen Testing Lab)
Pressure Resistance for Oil, Petroleum & Paint Testing - determining pressure resistance properties of ready mixed paints and enamels by applying 1.81 kg load through a steel ball on two superimposed painted panels for five minutes and observing whether the base metal is visible. Complete with one steel ball and a weight.....
Product Code: NPPT-M12 - (Pressure Resistance For Testing Lab for Oil, Petroleum & Paint Testing Lab)
for Soil Testing - The unit provides a constant uniform shaking with automatic cycle test. Oscillating excursion is 200 mm at 175 strokes / minute rate. Complete with timer that automatically stops the shaker at the end of the test. Power Supply 230 V A.C. 50Hz.....
Product Code: NSOL-T12 - (Motorised Sand Equivalent Shaker Set For Testing Lab for Soil Testing Lab)
Tamping Rod for Concrete Testing - This is used for compacting concrete into cube moulds. This rod is made of steel it is 16mm dia., 600mm in length and rounded at both ends.....
Product Code: NCOT-C12 - (Tamping Rod For Testing Lab for Concrete Testing Lab)
LE Chatelier Mould for Cement Testing - It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class \'A\' Limes. Specification : It consists of a small split cylinder forming a mould. On either side of the split cylinder. Two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.....
Product Code: NCMT-E12 - (LE Chatelier Mould For Testing Lab for Cement Testing Lab)
VLSI Embedded System Trainers - XPO series: Aesthetically designed Injection molded Plastic enclosure XPO series of Embedded trainers VIZ; CPLD, FPGA, 89C51Rd2, PIC, 68HC11 etc Supports use of 5V tolerant ICs (FPGA etc.)....
Product Code: VLS-TR-12 - (VLSI Embedded System Trainers for VLSI Design Training Systems Teaching Labs)
Measurement of Magnetoresistance Experiments for Physics Lab for High School Science Kits Lab....
Product Code: HS-LAB0012 - (Measurement of Magnetoresistance Experiments for Physics Lab for High School Science Kits Lab).jpg "DC Dynamometer For Motor Testing (Electrical Lab)")
DC Dynamometer For Motor Testing for Electric Motors Teaching Labs (Electrical Lab) - This Model is an educational model suitable for demonstrating to students the complete know of the Basics, Components, Mechanicals, Loading methods, Torque evaluation, Loading scheme, Wear & Tear & Maintenance of these motors packaged in small rating. Students can make connections of their own with the help of the terminations provided for study of features viz Coupling the motor to be tested, Starting methods, Speed-Torque, Excitation control of Dynamometer, Power dissipation of Generator, Torque measurement. Technical Specs : Power ratings available : 1KW / 2KW/ 5KW/ 10KW Voltage Input: 230V DC RPM: 1440 / 2880 RPM Single / Double shaft extension, SPDP, IP23, IC01, B3, Class-B, S1, Solid yoke List Of Experiments : Load testing of AC Motor Load testing of DC Motor Torque calculation at various rpm Speed-Torque Analysis Voltage-Speed Analysis Speed reversal Efficiency Analysis Blocked rotor test Cold Resistance & Hot Resistance Motor Operation parameters Basic Overhauling Know how....
Product Code: ADM-012-NE - (DC Dynamometer For Motor Testing (Electrical Lab))
Equipment for Education, Engineering and Vocational Training - SMPS Trainer & SMPS Lab Training Kit - The SMPS trainer is a very adaptable product that has been designed to explain a very remarkable and frequently used Switching based power supply - The SMPS (Switched Mode Power Supply). The Trainer is designed to understand each section of SMPS in straight forward way. Various test points has been provided so that one can observe the inputs and outputs of each block contained.Being different from a conventional block diagram internal structures of different blocks are also shown. Switching Transformer and Chopper (the Heart of SMPS) are alsopresented to readily understand their operation and pin configuration. A low cost Training System demonstrating all basic concepts of SMPS In depth elucidation of Switching Transformer, which is one of the most important component of SMPS Variac can be connected with the kit Fault identification feature enabled Easy illustration of each block Designed with considering all safety standards Provided with a detailed Operating manual Technical Specifications Input : 80 to 230 VAC ±10%, 50 / 60 Hz Outputs : +12 V DC regulated : -12 V DC regulated : +5 V DC regulated Switching Transformer Input : 320 V DC switching at 132 KHz Output : 30 VAC (approx) Fuse : 500 mA (Slow blow, spare fuse is given with mains socket) Experiments that can be performed Study of Switching Transformer Study of PWM switching device Study of Optocoupler Study of Regulation Study of SMPS with Variac input Study of various faults and their removal in SMPS circuit....
Product Code: CON-012-NE - (SMPS Trainer & SMPS Lab Training Kit for Vocational Training and Didactic Labs)
Analytical Balances....
Product Code: NLAB-0012 - (Analytical Balances for School Science Lab)
Equipment for Education, Engineering and Vocational Training - 1 : 8 Line Demultiplexer (digital)....
Product Code: DLTR-0012 - (1 : 8 Line Demultiplexer (digital) for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Thyristor Time Delay Relay Trainer for Power Electronics Training Labs Thyristor Time Delay Relay Trainer for Power Electronics Training Labs....
Product Code: PEC-012-NE - (Thyristor Time Delay Relay Trainer for Power Electronics Training Labs for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - FEATURES Copying facility from MASTER to SLAVE Supports EPROM, EEPROM & FLASH MEMORY Other features are same as of SPROG-VXC DEVICE SUPPORT: EPROMs: AMD/MMI, Atmel, Intel, NEC, NS, ST, Holtek, Macronix, SST, Winbond, MTP etc. EEPROM/FLASH: AMD, Atmel, Winbond, Intel, SST, SyncMos, Linkage, Macronix, ST, Dallas, EON, LinkSmart, Mosel_Vitelic, PTC, AST, PMC, AMIC, BenchMarq etc. SERIAL EEPROM: Atmel, ST, AKM, ROHM, ISSI etc.....
Product Code: NPLT-EC012 - (Handy EPROM Copier for Vocational Training and Didactic Labs)
Forced Vortex Apparatus for engineering schools....
Product Code: Fluid Mechanics0012 - (Forced Vortex Apparatus for engineering schools)
Count and See....
Product Code: MATHSKITS0012 - (Count and See for Maths Lab)Sliding Wedge Gear with Straight Line Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG012 - (Sliding Wedge Gear with Straight Line Engineering Training Model for engineering schools)
Fuel Supply System Of Diesel Engine Automobile Engineering Model and Training System, technical teaching equipment for engineering....
Product Code: NEAUTOM12 - (Fuel Supply System Of Diesel Engine Automobile Engineering Model and Training System for engineering schools)
Model of Sterling Boiler, technical teaching equipment for engineering - Heat Transfer Training Systems and Heat Lab Engine Trainers....
Product Code: NEMHTM12 - (Model of Sterling Boiler - Heat Transfer Training Systems and Heat Lab Engine Trainers for engineering schools)
Real Life Science Specimens, Stick Insect Manufacturer, Supplier and Exporter for Biology Lab, Biology Lab Exporters
.... Product Code: BIOSP0012 - (Real Life Science Specimens, Stick Insect for Biology Lab, Biology Lab Exporters)
High School Science Lab Equipment - Physics High School:
Measurement Physics High School
Force & Motion Physics High School
1-D Motion
Position vs Time
1-D Frame of Reference
Constant Velocity
Constant Acceleration
Freefall
2-D Motion & Force
Projectile Motion
Dynamics Systems
Force & Vector Analysis
Newton's Laws
Newton's 1st Law
Newton's 2nd Law
Newton's 3rd Law
Friction
Momentum Physics High School
Periodic Motion Physics High School
Circular Motion Physics High School
Energy & Work Physics High School
Thermodynamics Physics High School
Gases & Liquids Physics High School
Waves & Sound Physics High School
Light & Optics Physics High School
Electricity and Magnetism Physics High School
.... Product Code: LABS-EDU-00012 - (High School Science Lab Equipment for Teaching Equipments Lab)
Hydraulic Brake Chassis Trainer , technical teaching equipment for engineering
Hydraulic Brake Chassis Trainer for use in educational and research
labs. We bulk supply Laboratory Equipments for MOE Tenders as per
required specifications.....
Indoor Enclosed Aluminum Bulletin Boards - Enclosed Aluminum Bulletin Boards consist of a lockable cabinet that protects the messages and announcements you tack on the natural cork posting surface. Choose from a number of different sizes for your church, school, restaurant, or office and reach a larger audience on a broader level. Corners are neatly mitered and assembled with heavy-duty reinforcements and fasteners. Includes lockable doors, acrylic safety glass windows, continuous hinges, concealed mounting brackets, and natural pebble grain cork surfacing.Frames have a satin anodized finish.
....
Short range wireless communications - May have any of: WLAN trainer (IEEE 802.11n) should cover protocols and important measurements for understanding the communication systems; should come with software (compatible with windows 7) for configuration and monitoring; complete RFID, Zigbee and Bluetooth development boards and software.
Interfaces: GPIB (IEEE 1488.2), USB 2.0 (or higher) or Ethernet
Power Supply: 240V, 50-Hz, power cable with 3-pin plug (BS 1363)
Accessories: Any special power supplies, cabling or other essential components should also be provided.
Detailed training/experiment manuals (for the instructors and the students) in English.
The system should also provide for fault insertion and test points. The connectors/system should provide protection against incorrect insertion
....
Portable Handheld Data Logger and Sensors - OM-DAQPRO-5300....
Product Code: PHD29 - (Portable Handheld Data Logger and Sensors)
RTD Packed Bed Reactor Apparatus....
Product Code: ChemicalREA-10012 - (RTD Packed Bed Reactor Apparatus)
Los Angeles Abrasion Test Machine We are Leading Supplier of Los Angeles Abrasion Test Machine in India. We also bulk supply Los Angeles Abrasion Test Machine for laboratory tensers. Features The Los Angeles Abrasion Test Machine is used as quality control tool for aggregates, including crushed rock, gravel and slag The testing method determines the degradation when subjected to abrasion, attrition,impact and grinding Heavy steel cylinder and base frame Dust proof cover plate The machine comply with ASTM C131, EN1097-2, AASHTO T-96 international standard […] ....
Product Code: Civil Engineering0012 - (Los Angeles Abrasion Test Machine)
Microwave Trainer We are Leading Supplier of Microwave Trainer in India. We also bulk supply Microwave Trainer for laboratory tensers. Features : Communication using the Microwave System Measurement in Microwave system FSK modulation & Demodulation in Microwave band File transfer and data transmission Understanding of the micro strip design line theory Understanding the basic theory of microwave devices Design and simulation of Microwave devices Experiment in manufacturing and measurement of microwave devices Technical Specifications : Frequency Band : 2.4GHz ~ 2.5GHz Modulation : FSK Bit Rate : 4800 ~ 14400 bps Output power : + 4.5 dBm Impedance : 50Ω Substrate material : Rogers RO4003C PCB thickness : 0.508 mm Dielectric constant : 3.38 Low Noise Amplifier : (Gain : 26dB, Noise figure : 2.5dB, Input : p1dBm) Power Divider : (Type : 2 way Wilkinson, Return loss : 14dB, Insertion Loss : 0.5dB) Band Pass Filter (2.4 GHz) : ( Type : Edge-coupled, Return loss : 10dB, Insertion loss : 7.0dB) Band Pass Filter (2.5 GHz) : ( Type : Edge-coupled, Return loss : 10dB, Insertion loss : 7.0dB) RF Amplifier : ( Gain : 15dB, Input : -5dBm) Antenna ( Transmitting & Receiving ) ....
Product Code: Lab Trainers0012 - (Microwave Trainer)
D C Ammeter We are Leading Supplier of D C Ammeter in India. We also bulk supply D C Ammeter for laboratory tensers. Technical Specifications :- 1 Phase Digital DC Current Measurement 18 mm Large LCD Display Range & resolution : 2mA x 0.001mA, 20mA x 0.01mA, 200mA x 0.1mA, and 5A x 0.01mA Accuracy : ±(1.5% + 3d) Frequency response : 40Hz ~ 500Hz Polarity : Automatic switching “-“ indicates negative polarity Zero adjustment : Automatic Over input : Display shows “1” or “-1” Sampling time : Approx. 0.4 seconds Built in fuse for over load protection Safety : IEC 1010 CATII 600 V Input terminal : Standard banana terminals Operating Temperature : 0ºC ~ 50ºC power : DC 9 V battery ....
Product Code: Physics Lab0012 - (D C Ammeter)
DC Shunt Motor Trainer
.... Product Code: Workshop Lab - WLE0012 - (DC Shunt Motor Trainer)
PLC Simulator Trainer
.... Product Code: Workshop Lab - MWE0012 - (PLC Simulator Trainer)
Power Amplifier Training System
.... Product Code: Workshop Lab - CEW0012 - (Power Amplifier Training System)Blue-Ray/RW Disk Drive Trainer
.... Product Code: Workshop Lab - ITW0012 - (Blue-Ray/RW Disk Drive Trainer)
Decade Box – Resistance 13. Rheostat
.... Product Code: Workshop Lab - TMW0012 - (Decade Box – Resistance 13. Rheostat)Basic Pneumatic & Hydraulic Technology....
Product Code: Workshop Lab - SEW0012 - (Basic Pneumatic & Hydraulic Technology)
FLOW MEASUREMENT TEST SET....
Product Code: Workshop Lab - FMW0012 - (FLOW MEASUREMENT TEST SET)COMPACT SERIES AND PARALLEL PUMP TEST SET, Motor Dynamometer....
Product Code: Workshop Lab - PTW0012 - (COMPACT SERIES AND PARALLEL PUMP TEST SET, Motor Dynamometer)FRANCIS TURBINE TEST SET....
Product Code: Workshop Lab - TTW0012 - (FRANCIS TURBINE TEST SET)TWO STAGE AIR COMPRESSOR TEST SET, Water Cooled....
Product Code: Workshop Lab - ACW0012 - (TWO STAGE AIR COMPRESSOR TEST SET, Water Cooled)
