Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Ventilation Apparatus (Convection Apparatus) for Physics Lab India
.... Product Code: PHET-0065 - (Ventilation Apparatus (Convection Apparatus) for Physics Lab)
Ventilator Circuit Disposable
.... Product Code: HMEDLAB-48-10008 - (Ventilator Circuit Disposable)
Venturi Meter & Orifice Meter Apparatus
Recirculating design with supply tank & measuring tank.
• Non corrosive tanks & piping.
• Transparent Venturi meter & Orifice meter made in acrylic
DESCRIPRION:
The
Venturi meter & Orifice meter Apparatus is designed for calibration
of water flow meters. Set up consists of a venturi meter & orifice
meter clear acrylic fitted in pipe. Each flow meter has two pressure
ports which can be connected to a mercury manometer to measure pressure
difference at inlet & throat. This pressure difference is used to
calculate the water flow rate theoretically. Water is supplied from the
sump tank by centrifugal pump & measuring tank is provided to
measure the water flow rate. The entire setup is mounted on a strong
steel frame. By comparing the theoretical & measured flow rate, the
discharge coefficient for flowmeter can be determined.
EXPERIMENTAL CAPABILITIES:
•
To study water flow measurement using ventui meter & orifice
meter.• To determine discharge coefficient for flowmeter.• To compare
venture meter & orifice meter.
TECHNICAL SPECIFICATIONS:
.... Product Code: NEGEMG124 - (Venturi Meter & Orifice Meter Apparatus)
VENTURIMETER AND ORIFICE METER TEST RIG for engineering schools....
Product Code: MCH0011 - (VENTURIMETER AND ORIFICE METER TEST RIG for engineering schools)
Venturimeter and Orificemeter Calibration Set-up....
Product Code: FML0004 - (Venturimeter and Orificemeter Calibration Set-up)
Venturimeter Orificemeter Calibration Set-UP
.... Product Code: Technical0049 - (Venturimeter Orificemeter Calibration Set-UP)
Verification Clarke s Maxwell Reciprocal Theorem
.... Product Code: Technical0095 - (Verification Clarke s Maxwell Reciprocal Theorem)Equipment for Education, Engineering and Vocational Training - Verification of Excess 3 to Decimal Converter Trainer Verification of Excess 3 to Decimal Converter Trainer....
Product Code: ETKN-0743 - (Verification of Excess 3 to Decimal Converter Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Verification of Hooks Law Trainer Verification of Hooks Law Trainer....
Product Code: ETKN-0744 - (Verification of Hooks Law Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Verification of Kirchoffs Law Trainer Verification of Kirchoffs Law Trainer....
Product Code: ETKN-0745 - (Verification of Kirchoffs Law Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Verification of Laws of Resistance in Series and Parallel Trainer Verification of Laws of Resistance in Series and Parallel Trainer....
Product Code: ETKN-0746 - (Verification of Laws of Resistance in Series and Parallel Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Verification of Laws of Resistance in Series and Parallel using Meter Bridge Trainer Verification of Laws of Resistance in Series and Parallel using Meter Bridge Trainer....
Product Code: ETKN-0747 - (Verification of Laws of Resistance in Series and Parallel using Meter Bridge Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Verification of Laws of Resistance in Series and Parallel using PO Box Trainer Verification of Laws of Resistance in Series and Parallel using PO Box Trainer....
Product Code: ETKN-0748 - (Verification of Laws of Resistance in Series and Parallel using PO Box Trainer for Vocational Training and Didactic Labs)
Equipment for Education, Engineering and Vocational Training - Verification of Newtons Formula Trainer Verification of Newtons Formula Trainer....
Product Code: ETKN-0749 - (Verification of Newtons Formula Trainer for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Verification of Stefans Law of Radiation Trainer Verification of Stefans Law of Radiation Trainer....
Product Code: ETKN-0750 - (Verification of Stefans Law of Radiation Trainer for Vocational Training and Didactic Labs)
Vernier Caliper to measuring the (outer/inner) diameters with approx. range:(0-200) mm and (0.01) mm as accuracy....
Product Code: MEAS1007 - (Vernier Caliper)
Vernier Calipers - 571....
Product Code: WEIG-0107 - (Vernier Calipers - 571)
Vernier Height Gauges - 0-300mm ,with magnifier
....
Vernier Microscope Description: We offer vernier microscope, vernier microscope, chemistry instruments, hospital equipment & geography teaching models. We are a leading manufacturer & exporter from India.....
Product Code: NLAB-0417 - (Vernier Microscope for School Science Lab)
Vernier Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0008 - (Vernier Microscope for Science Lab)
Vernier Photogate Sensor....
Product Code: DataNAS-10005 - (Vernier Photogate Sensor)
Vernier Theodolite for Surveying Testing - German pattern vernier theodolite least count 05/10/20 seconds as per customer requirements with four slow motion, erect image, 22x magnification, coated lens, alongwith powder coated/ anodized folding. Aluminum tripod complete in plastic/ wooden carrying case. Optical plummet arrangement is provided for centring.....
Product Code: NSUV-Y4 - (Vernier Theodolite For Testing Lab for Surveying Testing Lab)
Vertical Autoclave - Fully automatic vertical autoclave and Industrial Autoclave with international quality standard. This vertical autoclave is designed to meet the requirements of sterilization procedures and is perfect for clinics, hospitals, research laboratories and educational institutes. This vertical autoclave is made of double walled units. The outer case is constructed of thick PCRC sheets and is duly pre-treated with primers and painted with stove enamel or can be powder coated. This feature makes this vertical autoclave safe from rust and lets you enjoy long lasting performance. The internal chamber is made of S.S.304 grade heavy gauge stainless steel. This model also comes with air insulation from inside. For comfortable and safe open and closing operation, a strong lid has been used with locking arrangements. It is used for sterilization under working steam pressure up to 15 PSI. This unit runs on 220 Volt 50 HZ power supplies. Further this vertical autoclave also equipped with low water level alarm and cut off, sensor open alarm, solenoid valve for automatic purging and exhaust. An industrial grade energy efficient ring type heater has been used for heating, which is capable to curb on your heavy electric power bills during the operation. Features: Double walled construction outer M.S / S.S.304 & Inner S.S.304 with heavy Gauge stainless steel Lid is made of S.S.304 heavy gauge die pressed Equipped with pressure gauge, steam release valve & 2 Safety valves Supplied with S. S. perforated basket Used for sterilization under working steam pressure up to 15 PSI Fitted with silicon rubber gasket joint less Work in 230 Volts 50Hz Foot lifting arrangement to open lid....
Product Code: NAAY-M37 - (Vertical Autoclave)
Vertical Band Saw - Throat 410mm, work height 300mm with accessories including tilting table. variable
speed, halogen work light, speed display, blade guards
....
Vertical hollow Shaft Motor - 15....
Product Code: ADM-213 - (Vertical hollow Shaft Motor - 15 for Electric Motors Teaching Labs)
Vertical Milling Machine - Turret mill 1270mrn x 254mm table, with accessories including 2 axis digital readout, Longitudinal power feed, cross power feed,
coolant system, steel coolant tray, central lubrication system, halogen work light, toolbox.
clamp kit,
....
Vertical milling machine The range of Our machines are carved out with absolute perfection and have unsurpassed quality. These machines match the international quality standards and thus help us in garnering a huge client base all over the globe.....
Product Code: VMM66 - (Vertical milling machine)Vertical Motors - 25....
Product Code: ADM-153 - (Vertical Motors - 25 for Electric Motors Teaching Labs)
Vertical Water Tube Boiler, technical teaching equipment for engineering - Heat Transfer Training Systems and Heat Lab Engine Trainers....
Product Code: NEMHTM06 - (Vertical Water Tube Boiler - Heat Transfer Training Systems and Heat Lab Engine Trainers for engineering schools)Equipment for Education, Engineering and Vocational Training - Learn VHDL the Direct way with our low-cost, interactive VHDL simulator. DirectVHDL is built around a VHDL interpreter that allows you to edit and simulate your VHDL design without complicated setup or compilation procedures. DirectVHDL simply loads and simulates in one step. DirectVHDL includes the following: - VHDL Workspace - An easy-to-use manager that serves as a starting point to launch the VHDL editor and simulator. - VHDL Editor - An advanced editor providing syntax coloring and syntax-error detection. Perfect for beginners, this editor highlights syntax errors as you type! - VHDL Simulator - Allows you to simulate and debug your design with a graphical waveform viewer. - VHDL Tutorial - Provides an easy introduction to the VHDL language. Requirements - Windows - Windows 95,98,Me,NT 4.0, or 2000, 15 MB hard disk space, 64 MB RAM. - Mac OS X IMPLEMENTATION & EXPERIMENTAL BOARDS(More than 20 hardware experiments) - Universal FPGA/CPLD Kit - Training Kits for Virtex, Spartan 2S, 2SE, CPLD, - FPGA,Altera....
Product Code: NPLT-EC038 - (VHDL Simulator for Vocational Training and Didactic Labs)Vial Washing Machine - 121....
Product Code: PHRM-0022 - (Vial Washing Machine - 121)
Vibrating Machine for Cement Testing - Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibrating of lesser amplitude to the mould while casting This is achieved in a vibrating machine. Vibrating machine is used for the preparing of mortar cubes for the determination of compression strength of ordinary and rapid hardened Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements. The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft within a distance of 25mm below it. The electric motor drives the shaft of the frame and thus imparts required vibration to the moulds. The frequency of vibration is 12000 +/- 400 Vibration Per Minute. Supplied complete with on 7.06 cm Cube Mould with loose base plate, a time switch 0-5mins x 1mm. Spares : Set of springs, belt and belt guard. Optional : Digital Preset Timer can be supplied at an extra cost.....
Product Code: NCMT-E33 - (Vibrating Machine For Testing Lab for Cement Testing Lab)
Vibrating Table for Concrete Testing - Designed to carry a load of 140 kg . The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm and has stops along its edges to prevent moulds from walking off the table during vibration . A crass arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing frequency. A switch is provided for starting the motor. Suitable for operator on 440 Volts, A.C. Three Phase, 50 Cycles. Table top size : 75cm x 75cm & 100cm x 100cm also available at an extra cost.....
Product Code: NCOT-C24 - (Vibrating Table For Testing Lab for Concrete Testing Lab)
Vibration Box for Physics Lab India
.... Product Code: PMAG-0056 - (Vibration Box for Physics Lab).jpg "Vibration Lab (Set Of 11 Experiment)")
Vibration Lab (Set Of 11 Experiment)....
Product Code: TML0006 - (Vibration Lab (Set Of 11 Experiment))
Vibration Lab Complete 11 Experiment On 1 Frame
.... Product Code: Technical0018 - (Vibration Lab Complete 11 Experiment On 1 Frame)Vibration of Spiral Spring Apparatus
Spiral spring
- stiffness: c=238Nmm
- cross-section: 10x1mm
- effective length: approx. 800mm
- inside radius: 10mm
- outside radius: 50mm
Weights made of stainless steel
- mass: 0.5kg
- diameter: 50mm
Levers made of stainless steel
- diameter: 8mm
- length: 154mm
- arm radius of the rotating mass: 36...150mm
Angle measuring scale
- 0...360°
- resolution: 1°
Base plate
- w x h: 200x250mm
.... Product Code: V450 - (Vibration of Spiral Spring Apparatus)
Vibrator Electrical (Melde's Apparatus) Manufacturer, Supplier and Exporter for Physics Lab
.... Product Code: PWSO-0029 - (Vibrator Electrical (Melde's Apparatus) for Physics Lab)
Vibratory Motors - 229....
Product Code: ADM-094 - (Vibratory Motors - 229 for Electric Motors Teaching Labs)
Vibro- Consistometer - Amplitude (withemptycontainer): 0.5mm, Vibratingfrequency: 0.5Hz, Slumpconesize (Top Dia. x BottomDia. x Height) 100x200x300mm....
Product Code: VCS53 - (Vibro- Consistometer)
Vicat Apparatus We are Leading Supplier of Vicat Apparatus in India. We also bulk supply Vicat Apparatus for laboratory tensers. Features For determination of normal consistency of hydraulic cement, gypsum plaster and lime Setting time of cement, gypsum plaster and gypsum concrete Specifications The apparatus consists of the following : A frame with a vertically moving bearing rod Mould in the form of frustum of a cone 70 mm bottom dia. 60 mm top dia. and 40 mm high with base plate NeePlunger 10 mm dia. x 50 mm long Plunger 19 mm dia. x 44.4 mm long Plunger 12.5 mm dia. x 25 mm long One brass weight
.... Product Code: Civil Engineering0025 - (Vicat Apparatus)
VICAT Needle Apparatus for Cement Testing - This instrument is used for determining the normal consistency and setting times of cement and \'A\' class limes. The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.....
Product Code: NCMT-E3 - (VICAT Needle Apparatus For Testing Lab for Cement Testing Lab)
VICAT Needle Apparatus with Dashpot for Cement Testing - Same as Vicat Needle Apparatus but in addition is fitted with a dashpot which facilities gentle lowering of the needles. Accessories: Mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm i.d. base dia x 60mm i.d. top dia, 40 mm height. Note: 1) Normally set of needles and mould which meet is requirements as per I.S. 5513 are supplied. While ordering please specify the specification code of the instrument required. 2) Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc.....
Product Code: NCMT-E4 - (VICAT Needle Apparatus with Dashpot For Testing Lab for Cement Testing Lab)
for Soil Testing - This is fork determining the bearing capacity of sub grades or for compaction control. It also used for rapidly of soils in shallow exploration work. Consists of a study handle under. Which is fixed a sensitive proving ring. An extension piece is fixed to the bottom of the proving ring and carries a detachable penetration cone at its tip. Proving ring capacity 100 kg (1kn) and 0.002mm dial gauge provided indicates the penetration load applied.....
Product Code: NSOL-T24 - (VICKSBERG Penetrometer (Proving Ring Type) For Testing Lab for Soil Testing Lab)
Video Microscope Manufacturer, Supplier and Exporter for Science Lab
.... Product Code: NMRO-0056 - (Video Microscope for Science Lab)
