Educational Scientific Instruments, School Laboratory Scientific Equipment, Biology Lab Equipment, Physics Lab Equipment, Chemistry Lab Instruments, Laboratory Equipment, Biology Lab Equipment, School Lab, Math Lab, Electronics Lab Trainer, Microscopes, Engineering Lab Equipment, Petroleum Testing Equipment, Survey Instruments, Hospital Equipment, Medical Monitoring System, Physiotherapy Equipment for Schools, Colleges, University and Research Lab.
Diesel Engine Sectioned for Automotive Lab, Automotive Testing Tab and Automobile Engineering Training Labs
....
Sodium Cobaltinitrite....
Product Code: NECHEMICAL-L6028029 - (Sodium Cobaltinitrite)Lutetium (III) Acetate....
Product Code: NECHEMICAL-L6020029 - (Lutetium (III) Acetate)Ammonium Reineckate....
Product Code: NECHEMICAL-L6002029 - (Ammonium Reineckate)Phenyl Phosphate Disodium Salt....
Product Code: NECHEMICAL-L5007029 - (Phenyl Phosphate Disodium Salt)Pipes Disodium Salt....
Product Code: NECHEMICAL-L5005029 - (Pipes Disodium Salt)Potassium Chromate 0.0333m (0.1N)....
Product Code: NECHEMICAL-L3003029 - (Potassium Chromate 0.0333m (0.1N))N,N-Diphenyl Benzidine AR....
Product Code: NECHEMICAL-L3002029 - (N,N-Diphenyl Benzidine AR)
Sulphanilic Acid AR/ACS....
Product Code: NECHEMICAL-L2003029 - (Sulphanilic Acid AR/ACS)
Silicotungstic Acid AR....
Product Code: NECHEMICAL-L2001029 - (Silicotungstic Acid AR)
Vacuum Drying Oven India....
Product Code: NG210 - (Vacuum Drying Oven India)
Pathology Grossing Workstation
.... Product Code: HMEDLAB-PAT-1010029 - (Pathology Grossing Workstation)
Cubes Wood or Plast Colored
.... Product Code: SCHOOLKITLAB0029 - (Cubes Wood or Plast Colored)
Travelling Microscope - Wide Aperture Optics.Accurate and precise arrangement.
Travelling Microscope - Wide Aperture Optics.
Accurate and precise arrangement.
Traveling Microscope is extensively used in Research, Colleges, Schools
and Industrial laboratories for accurate measurement of the diameters of
different objects. Two slow motion knobs are provided for taking
accurate readings. For placing objects on horizontal stage, milky
cenolite sheet is provided on the base. The position of the Microscope
can be varied coarsely by sliding along the rails, or finely by turning a
screw. The microscope is focused by rack and pinion and has achromatic
objective of 50mm focal length and eye piece with cross line graticule.
Purpose of the microscope is to aim at reference marks with much higher
accuracy compared to bare eyes .It is used in labs to measure refractive
index of liquids using the geometrical concepts of Ray Optics. It is
also used for more accurate determination of small variation in the
liquid levels, the refractive index of liquids as well as in surface
tension & diameter of capillary tubes with precision
Wide Aperture Optics
Accurate and precise arrangement
Magnifying lens for reading
Rack and pinion arrangement focusing
Learning material CD....
Three Phase Low Voltage Power Supply - Designed by considering all the safety standards. It has two output mentioned as output 1 & output 2.....
Product Code: EET-TR-30 - (Three Phase Low Voltage Power Supply for Electrical Engineering Teaching Labs)
PCM Generation & Demodulation using CODEC Chip - PCM Generation & Demodulation using CODEC Chip -compact and user
friendly learning platforms to provide a modern, portable, comprehensive
and practical way to learn Technology. Each TechBook is provided with
detailed Multimedia learning material which covers basic theory, step by
step procedure to conduct the experiment and other useful information.
Scientech 2123 PCM Generation & Demodulation using CODEC Chip
Techbook is a stereo codec based PCM Generator and Demodulator training
system. The system has on-board selectable clock source and analog
signal source. The analog signal source generates sinusoidal signal.
Various test points and connection sockets are provided for easy
understanding of an audio CODEC. It also shows the effect of various
sampling rates on coding of speech signal. Coding seeks to minimize the
number of bits in the digital representation of a signal without an
objectionable loss of signal quality. High quality is attained at low
bit rates by exploiting signal redundancy and certain types of coding
distortion are imperceptible because they are masked by the signal.
On-board clock generation
On-board signal generation
Audio interface for PCM coding and decoding
Low voltage requirement for operation
Variable sampling rate as per system clock used....
Equipment for Education, Engineering and Vocational Training - 1 : 8 Line Demultiplexer (Digital) - Computer Logic Training Board has been designed specifically for the study of 1:8 Line Demultiplexer. This Training Board gives a better understanding of the phenomena of demultiplexing with one input demultiplexed to eight outputs using three control inputs (Address). Practical experience on this board carries great educative value for Science and Engineering Students. Object: To Study 8-bit 1:8 Line Demultiplexer using IC 74138. Features: The board consists of the following built-in parts : 01. + 5V DC at 50mA, IC regulated power supply internally connected. 02. Demultiplexer IC 74138. 03. Timer IC 555. 04. SPDT switches for logic selection. 05. LEDs for visual indication of status. 06. Adequate no. of Electronic Components. 07. Mains ON/OFF switch, Fuse and Jewel light. * The unit is operative on 230V ±10% at 50Hz A.C. Mains. * Good Quality, reliable terminal/sockets are provided at appropriate places on panel for connections / observation of wave forms. * Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.....
Product Code: ETKN-30 - (1 : 8 Line Demultiplexer (Digital) for Vocational Training and Didactic Labs)
Pulveriser (NATM-M30 for Aggregate Testing - Designed for grinding materials to produce fine mesh samples. deal for use in Cement and Chemical Industries. Self contained grinder with a rotating disc having planetary movement in vertical plane. Reduces about 450g quartz type material to 100 mesh in one minute. Suitable for operation with 440V, Three Phase, A.C. supply....
Product Code: NATM-M30 - (Pulveriser For Testing Lab for Aggregate Testing Lab)
Colony Counter ORDINARY : Body made of mild steel with attractive paint. Sloping at front cover with large magnifying lens. Built in large free illumination with black reflection free background. Complete with woulfheugel, counting plate. Colony Counter DIGITAL: Body made of mild steel with attractive paint. Sloping at front cover with large magnifying lens. Built in large free illumination with black reflection free background. Complete with woulfheugel, counting plate. Special pen type probe allows marking & counting simultaneously. Counting is registered on a four digit resettable Electronic counter. With audio beep at every count. A fluorescent light provides uniform day light illumination....
Product Code: NAAY-M30 - (Colony Counter)
for Soil Testing - Same as above but instead of a set of three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, bore tube is provided with over flow arrangement for constant head tests. The remaining tubes are used for falling head test.....
Product Code: NSOL-T30 - (Universal Permeability For Testing Lab for Soil Testing Lab)
Analogue Compression Testing Machine for Concrete Testing - Compression Testing Machines Loading Unit : - The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-alingning action. To facilitate testing of various size specimens, suitable size spacers are provided. A ball seating attachment is fixed on the upper platen to test the machine\\\'s stability. Pumping Unit : The hydraulic pumping unit is: -Manually Operated or -Electrically Operated The loads are measured on Bourdon tube type load gauges which are calibrated against certified load rings. The load gauges are fitted with a maximum load pointer. Both the Pumping units, Manually operated and Electrically operated, are of two-speed design. The two speed pump facilitates fast approach of the platens for daylight closure, thus eliminating the need for the lead screw. In the Electrically Operated Pumping Units, load gauges are fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of gauge, avoiding any over-loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing by observing the progress of the load gauge reading. Potable Compression Testing Machine - The equipment consists of a Loading Unit, an integral double acting pumping unit fitted to the base of the machine and a calibrated Load Gauges is fitted with the top. It has a detachable Hydraulic Jack. The hydraulic cylinder is placed on the base of the Loading Unit. Ranges : 50kN to 3000kN.....
Product Code: NCOT-C30 - (Analogue Compression Testing Machine For Testing Lab for Concrete Testing Lab)
Jolting Apparatus for Cement Testing - making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortar for determining the transverse strength. Specification : The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table. There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V-belt an pulleys. The cam rotates at a rate of 60 Rev/Min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 Jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be supplied at an extra cost. Accessory : (1) Steel mould with base plate having three compartments each having 40mm x 40mm x 160mm , internal dimensions. (2) Apparatus for de-moulding the specimen.....
Product Code: NCMT-E30 - (Jolting Apparatus For Testing Lab for Cement Testing Lab)
Lissajous Pattern Trainer - Lissajous Pattern Trainer -Lissajous Pattern Trainer" is a unique
product designed to explain the measurement of unknown frequency, phase
difference and resonance frequency using Lissajous Pattern. It includes
two sine wave generators for ease of operation.
Cathode Ray Oscilloscope is one of the most versatile and widely used
electronic instrument useful in measuring wave parameters such as time
period, frequency and voltage. Lissajous patterns are formed on the CRO
screen when two signals are provided simultaneously on channel X & Y
in XY mode. The result of these patterns help in analyzing signal
parameters.
Study of Lissajous figures
Unknown frequency calculation using Lissajous figures
RLC resonance frequency calculation using Lissajous figures
Phase Difference calculation using Lissajous figures....
CPU: Boards compatible for 89C61X2, PIC 16F877A, LPC 2148, AT mega16 microcontrollers. ISP Programming facility. On-board interface like 8 I/P switches, 8 Led output, 16x2 LCD display, 4 digit 7-segment display, I2C like 24c512, DS1307 RTC, 8 bit ADC & DAC, Temperature sensor DS18B20 LM35 temperature sensor, 4x4 matrix keyboard, Relay, Buzzer. 24 I/O Lines Provided on a 26 pin FRC Connector for external interface In-built Power supply of +/- 12V, +5V.....
Product Code: ES30 - (Universal Embedded Trainer for Embedded System Trainers Teaching Labs)
High quality servo-potentiometers of 360° shaft rotation. Built-in signal and power sources. 3 1/2 digits DVM for measurements.....
Product Code: I 30 - (Potentiometric Error Detector for Instrumentation Electric Labs)
Three Phase Lab for Electrical Lab for Electric Motors Teaching Labs - The Three Phase Lab with Three Phase Low Voltage Power Supply is an elite training system for the electrical laboratories. There is a three phase low voltage supply that provides 18 V of low voltage which is highly safe. This system is valuable in understanding the basic concepts of Three phase circuits like star-delta connections, their phase and line voltages, currents etc. Being different from the present scenario, this system is designed in such a way that a student can himself make connections of three phase circuits because all the experiments are performed on low voltage. The product is designed with keeping in mind that R, L, C combination can be connected in series as well as in parallel in Three Phase circuits. Designed considering all the safety standards Hands on Practice Stand alone operation Test points are provided to measure line and phase parameters Low cost training system 2 Years Warranty Provided with a detailed Operating manual Experiments that can be performed Study of Three phase low voltage power supply Study of Three phase star connection Study of Three phase delta connection Study of Three phase circuits with balanced load Study of Three phase circuits with unbalanced load Three phase power measurement....
Product Code: ADM-030-NE - (Three Phase Lab for Electrical Lab)Beehive Shelves....
Product Code: NLAB-0030 - (Beehive Shelves for School Science Lab)
Equipment for Education, Engineering and Vocational Training - Forced Commutated Circuits for Power Electronics Training Labs Forced Commutated Circuits for Power Electronics Training Labs....
Product Code: PEC-030-NE - (Forced Commutated Circuits for Power Electronics Training Labs for Vocational Training and Didactic Labs)Equipment for Education, Engineering and Vocational Training - Universal IC Tester is a Table-Top version, designed as a powerful tool for manufacturers, servicing engineers, R&D personnels to test a wide range of IC's of Digital, Analog, CPU & RAMs.Tests most of the 6 to 40 pin ICs in DIP package. The list includes 74/54, 40/45, 93/96 series ICs, EPROMs, RAMs, peripheral ICs, microprocessor (8088/8085/Z80/6502), operational amplifiers, voltage comparators, transistor arrays, optocouplers, analog switches, voltage followers, timers, A to D converters, D to A converters and miscellaneous analog ICs. Automatic testing of variety of ICs. Potential free 20 pin ZIF socket for testing analog ICs and 40 pin universal ZIF socket for testing digital ICs are provided. 16 character x2 line LCD dot matrix display and 16 keys keyboard for man to machine communication and easy operation. Single step mode enables the user to test the IC step by step. Self test facility to test the internal modules of the IC tester automatically at power on and also through 'SELF TEST' key of the keyboard. Audio alarm to user whenever it is required. SPECIFICATIONS IC PACK : Digital ICs up to 40 pins and analog ICs up to 20 pins in DIP package. IC TYPE : Tristate, open collector & bidirectional TTL/CMOS digital ICs also analog ICs as per list. TEST BY : Truth table comparison for digital ICs. Functional test of output for various input conditions for analog ICs. ZIF : 20 pin DIP ZIF for analog ICs and 40 pin Universal ZIF for digital ICs. KEY : 16 keys DISPLAY : 16 character x 2 line SUPPLY VOLTAGE : 230V AC.....
Product Code: NPLT-EC030 - (Universal IC Tester for Vocational Training and Didactic Labs)
Geometric pyramid....
Product Code: MATHSKITS0030 - (Geometric pyramid for Maths Lab)Slide Crank Mechanism Engineering Training Model, technical teaching equipment for engineering....
Product Code: NEGEMG030 - (Slide Crank Mechanism Engineering Training Model for engineering schools)
Demonstration Differential Gear Automobile Engineering Model and Training System, technical teaching equipment for engineering....
Product Code: NEAUTOM30 - (Demonstration Differential Gear Automobile Engineering Model and Training System for engineering schools)
Sudgen Super Heater, technical teaching equipment for engineering - Heat Transfer Training Systems and Heat Lab Engine Trainers....
Product Code: NEMHTM30 - (Sudgen Super Heater - Heat Transfer Training Systems and Heat Lab Engine Trainers for engineering schools)
Secchi Disc -
| The Secchi disk is used to measure water transparency in oceans and lakes. The disc is mounted on a pole or line, and lowered slowly down in the water. The depth at which the pattern on the disk is no longer visible is taken as a measure of the transparency of the water. This measure is known as the Secchi depth and is related to water turbidity. | |
Physics Lab Equipments....
Product Code: LABS-EDU-00030 - (Physics Lab Equipments for Teaching Equipments Lab)
Sectioned Coil Spring Clutch Trainer, technical teaching equipment for engineering
Wall panel representing a double circuit braking system. As in real conditions, it is operated by a hydraulic pump connected to the disc brake and a drum brake. A braking adjuster is placed between the pump and the (rear) drum brake in the circuit in order to avoid the rear wheels locking during the braking phase.
The same devices used in the circuit have been sectioned and added in the panel to clearly show their operation.
This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts. Many parts have been chromium plated and galvanised for a longer life.
Programmable Logic Controller Application Modules -
The trainer should be designed to work with most equipment that can be controlled by PLCS. It should specifically work with the PLC trainers provided in this package. It should have the following features:
Specifications:
1. Base Station
The base station should have the following specifications:
2. Modules:
a. Traffic Light Module
Objective: After completing this experiment, the students are expected to understand of using the TIM instruction in the Traffic Light operation programming application
b. Vehicle Parking Module
Objective: After completing this experiment, the students are expected to understand of using DIFU,DEC, CMP, and MOVE instructions in the Vehicle Parking operation programming application.
c. Elevator Lift Module
Objective: After completing this experiment, the students are expected to understand of using SET, KEEP, SBS, TIM, SBN and RSET instructions in the Elevator Lift operation programming application.
d. Laundry Module
Objective: After completing this experiment, the students are expected to understand of using KEEP, SET, TIM, DIFU, CNT and RSET instructions in the Laundry operation programming application.
e. Bottling Plant Module
Objective: Upon the completion of this experiment, the students will be guided to understand of using SET, TIM, and RSET instructions in the Bottling Plant operation programming application
f. Product Line Inspection Module
Objective: After completing this experiment, the students are expected to understand of using SET, TIM, and RSET instructions in Product Line Inspection operation programming application
g. Packing Module
Objective: After completing this experiment, the students are expected to understand of using CNT instruction in the Packing system Operation programming application.
h. Tank Level and Pump Control Module
Objective: After completing this experiment, the students are expected to understand of using DIFU and TIM instruction in the Tank Level and Pump Control Operation programming application
i. Alarm System Module
Objective: After completing this experiment, the students are expected to understand of using TIM and KEEP instruction in the Alarm System Operation programming application.
j. Safety Door Module
Objective: After completing this experiment, the students are expected to understand of making the simple ladder diagram for safety door application
k. Fan Control Device Module
Objective: After completing this experiment, the students are expected to understand of using the SBS, SBN and RSET in programming application.
l. Seven Segment Display Module
Objective: After completing this experiment, the students are expected to understand of using SET, MOV, ANDW, JMP, DIV, SBS, RSET, JME, CMP, RET, SBN, ROR, and RET in Seven Segment Display Operation programming application
m. Tank Filling/Draining Control Module
Objective: After completing this experiment, the students are expected to understand of using DIFU, DIFD, CNT and TIM in Filling, Draining Control Operation programming application
n. Measuring The Life of a Cutting Knife/Punch Module
Objective: After completing this experiment, the students are expected to understand of using DIFU, CLC, ADD, CMP and MOV in Measuring the Knife of a Cutting Knife Operation programming application.
o. Two Door Auto Access Warehouse Module Model
Objective: After completing this experiment, the students are expected to understand using TIM and KEEP in two doors auto access warehouse operation programming application.
1. To come complete with comprehensive courseware included with operation manuals and experiment manuals.
Experimental manuals to be provided during bidding process to ensure all above training exercises are covered.
.... Product Code: PLC77-P1,P5,P6,P7 - (Programmable Logic Controller Application Modules)
Disc Harrow and accessories - 50cm (Diameter) Standard
....
Unconfined Compression Test Machine We are Leading Supplier of Unconfined Compression Test Machine in India. We also bulk supply Unconfined Compression Test Machine for laboratory tensers. Unconfined Compression Test Machine Features : The electric strain unconfined compression tester is used to determine un-confined compression strength of cohesive and semi-cohesive soils. The test is used to supply information needed for the design and construction of civil engineering structures. Technical Specifications of the Electric Strain Unconfined Compression Tester Lift plate journey per revolution of the wheel : 0.2 mm stroke of the lift plate : 30 mm Lifting speed : 1.8mm/min ±15% axial load : 0.6 KN Diameter of the cylinder : Ф39.1 ....
Product Code: Civil Engineering0030 - (Unconfined Compression Test Machine)
PC Based Electricity & Electronics Trainer
.... Product Code: Workshop Lab - WLE0030 - (PC Based Electricity & Electronics Trainer)
Electro-Hydraulic Training Set, Advanced Level
.... Product Code: Workshop Lab - MWE0030 - (Electro-Hydraulic Training Set, Advanced Level)
CENTRIFUGAL PUMP, Variable Speed
.... Product Code: Workshop Lab - HBW0030 - (CENTRIFUGAL PUMP, Variable Speed)FREE AND FORCED CONVECTION....
Product Code: Workshop Lab - ATW0030 - (FREE AND FORCED CONVECTION)
CNC Semi Production Lathe....
Product Code: NE-CNC-LAT38 - (CNC Semi Production Lathe)
